windscreen finisher trim needed asap!!!!

[shortsprint]

Please help!<br>
Just had my sprint finally mot'd,needed to replace the windscreen,done that but require the silver trim,which just fell to pieces<!--EZCODE EMOTICON START :eek --><img src=http://www.ezboard.com/images/emoticons/eek.gif ALT=":eek"><!--EZCODE EMOTICON END--> .<br>
I remember i read somebody had lots?<br>
Any ideas where i can get some asap?<br>
Many thanks<br>
Barry

<p></p><i></i>

[Kehoemj]

Try:<br>
<br>
Wins<br>
Unit 17, Hobbs Ind Estate<br>
Newchapel<br>
Lingfield<br>
Surrey<br>
<br>
01323 836060<br>
<br>
winsandco@tinyworld.co.uk<br>
<br>
He had rolls of the stuff last time I visited.

<p></p><i></i>

[1300dolly]

phoenix supplies<br>
the courtyard<br>
9 mantle street<br>
wellington<br>
somerset<br>
ta21 8ar<br>
<br>
01823 660 194<br>
<br>
windscreen insert pvc crome £1.25 metre.<br>
<br>
Justyn

<p></p><i></i>

[shortsprint]

many thanks gents<!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END-->

<p></p><i></i>

[paulgeering]

make sure the finisher is warm when you fit it...makes it a lot easier.

<p></p><i></i>

[redrichie]

Is the same finisher used on the front and the rear? Last time i had my front screen out mine exploded and i put it in the bin before i checked it was the same...<!--EZCODE EMOTICON START :rolleyes --><img src=http://www.ezboard.com/images/emoticons/eyes.gif ALT=":rolleyes"><!--EZCODE EMOTICON END--> <br>
<br>
and how many metres for the front and back if so (not near my dolly to measure but want to order some....)

<p></p><i></i>

[algtj]

Rimmers sell the exact amount cut to size for front and rear screens.<br>
Tel 01522 568000<br>
<br>
Oh and anyone from Rimmers reads this, I am looking for commission!!!<!--EZCODE EMOTICON START :rollin --><img src=http://www.ezboard.com/images/emoticons/roll.gif ALT=":rollin"><!--EZCODE EMOTICON END--> <!--EZCODE EMOTICON START :rollin --><img src=http://www.ezboard.com/images/emoticons/roll.gif ALT=":rollin"><!--EZCODE EMOTICON END--> <!--EZCODE EMOTICON START :rollin --><img src=http://www.ezboard.com/images/emoticons/roll.gif ALT=":rollin"><!--EZCODE EMOTICON END-->

<p></p><i></i>

[1300dolly]

give nigel at phoenix a call ha will be able to tell you lenghs ect.<br>
Im doing my bit to keep the small companys in business<!--EZCODE EMOTICON START :D --><img src=http://www.ezboard.com/images/emoticons/happy.gif ALT=":D"><!--EZCODE EMOTICON END--> <br>
Justyn

<p></p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... 00dolly</A> at: 18/5/06 8:40 pm<br></i>

[Leeroy ORG 27R]

Bought some today, tenner including delivery, guessed at four metres just for the front!!

<p></p><i></i>

[davepoth]

When we measured it for Al's car at the restoration show, it came out as about 3m front and rear, so we got 7m to play it safe.

<p></p><i></i>

[2F45T4U]

I remember me Dave and Richie looking at everyones dolly at Himley Hall last TDCIR. No ones chrome finishers met in the middle! Do they shrink?

<p></p><i></i>

[1300dolly]

I thing (rare occurance) that the inset would originally have a fill in over insert. but i might be talking complete and utter dollyboy type speak<!--EZCODE EMOTICON START :lol --><img src=http://www.ezboard.com/images/emoticons/laugh.gif ALT=":lol"><!--EZCODE EMOTICON END--> (sorry kev couldn't type shite on this forum)<br>
<br>
Justyn

<p></p><i></i>

[shortsprint]

Bought some from Wins,ordered Wed rec'd Thurs!7.50 for front screen inc joiner.Exellent service.Thanks for the advice about fitting,i was planning to use Swarfega and a spreading tool my mate has supplied.

<p></p><i></i>