1850 box

[Gibbonz]

wont go into gear when changing 3rd to 2nd.<br>
Doesnt happen all the time but fails quite regularly.<br>
Is this caused by worn synchro's, which are on the way out as it wont go into 1st on the run, or is something else causing it.?<br>
Selector shaft bushings are all good.<br>
Cheers<br>
Rob Gibson<br>
NZ

<p></p><i></i>

[Unknown]

(This post is missing and can not be restored)

<p></p><i></i>