Starter Studs

[Mike Groom]

Can anyone tell me what the thread size is on the starter studs on an 81 Sprint please?<br>
Anyone used helicoiling to repair one?

<p></p><i></i>

[MaddMart]

3/8" UNF (9/16" AF).

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

[Jon Tilson]

Mine are all done with 3 bolts. (9/16 head and I'd go with marts thread size)<br>
Jonners

<p></p><i></i>

[Toledo Man]

I'll third that. I was helping somebody install a Sprint engine in a TR7 the day before the TDCIR and I worked on the starter motor so I know it is 9/16" AF!<br>
<br>
Mart, it was good to put a face to the name at the TDCIR.

<p>Toledo Man<br>
<br>
1974 Toledo 2-door (currently a spares car for Snowdrop)<br>
1973 1500fwd (Baby Blue slowly being recommissioned)<br>
1971 1500fwd (spares car for Baby Blue & future donor for the "Stretch 1500" project)<br>
1983 Acclaim HL (Becky, my daily driver)<br>
1977 Dolomite 1300 (Snowdrop, just failed the MoT - AAARRGGHHHH!!!!!)</p><i></i>