Exhaust manifold

[mahony]

were the exhaust manifolds for sprints machined at the factory for the specific head it was matched up with, as they have no gasket as such (mine needs helicoiling and just wondering can i swap with another manifold).

<p></p><i></i>

[MaddMart]

I don't beleive they were matched. No problem using a different manifold.

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

[dollyboy]

...and there should be a gasket <!--EZCODE EMOTICON START :rolleyes --><img src=http://www.ezboard.com/images/emoticons/eyes.gif ALT=":rolleyes"><!--EZCODE EMOTICON END-->

<p>project orange - gradual progress<br>
project STEALTH - PASS!!! <br>
project white - AAARGGGHHH!!! too many cars!!!</p><i></i>

[mahony]

Not between head and manifold on a sprint,downpipe and manifold theres a gasket.

<p></p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... >mahony</A> at: 24/9/06 2:54 pm<br></i>

[MaddMart]

No Kev, Sprints never had a gasket. Although you can get them from Sprintparts.<br>
<br>
<br>
<!--EZCODE IMAGE START--><img src="http://www.dolomitesprint.com/images/pa ... /02-11.gif" style="border:0;"/><!--EZCODE IMAGE END-->

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... addMart</A> at: 24/9/06 2:56 pm<br></i>

[mahony]

looking at the exploded diagram for the manifold it shows a helicoil insert for the thread thats stripped on my own manifold yet i have never seen one listed on any parts list other than the bl parts book,can anyone else remember did they have to fit a helicoil insert into the manifold when changing the downpipe.looking again at the diagram the part number lists three inserts required for the manifold.

<p></p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... >mahony</A> at: 24/9/06 3:21 pm<br></i>

[paulgeering]

as explained above, the Sprint was not fietted with an exhaust manifold gasket.<br>
<br>
However, should you wish to fit one for whatever reason, they are available from Moss. Cannot remember the part number but think it is a TR7 item?? I used it on a previous Sprint that had a custom 4:1 manifold.

<p></p><i></i>

[george]

down pipe to manifold is indeed the same as a tr7<br>


<p></p><i></i>