The Triumph Dolomite Club - EzBoard Archive

which would be best for steering rack gaitors?<br>
<br>
just missed a nice re-furbed steering rack on ebay (which sucks) so I'm re-furbing the orginal with an uprated UJ, repainted, new gaitors etc.<br>
<br>
I also got a pair of gaitors which were meant for herald etc, I was assured these are dolly compatible but seem shorter to me, any thoughts?<br>
<br>
ta <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END-->

<p></p><i>Edited by: <A HREF=http://p206.ezboard.com/bthetriumphdolo ... omiteuk</A> at: 1/11/06 9:44 am<br></i>

stays in when the gaitor splits...<br>
Oil doesnt.<br>
No brainer.<br>
Jonners

<p></p><i></i>

lm grease. I'm surpised herald ones are shorter, but if they are, get the correct part as they will soon pull off. If the gaitors come off, weather its grease or ep 90, the grit will get in and act as grinding paste!

<p></p><i></i>

ta folks, was thinking grease was the way to go.<br>
<br>
will offer up the gaitors before shelling out again. the ones I got are all over ebay regularly... never mind <!--EZCODE EMOTICON START :o --><img src=http://www.ezboard.com/images/emoticons/embarassed.gif ALT=":o"><!--EZCODE EMOTICON END-->

<p>project orange - gradual progress<br>
project STEALTH - PASS!!! <br>
project white - AAARGGGHHH!!! too many cars!!!</p><i></i>