Hi-Torque Starter MOtor

[harryrc]

I'm replacing my starter motor with one of those hi-torque units. Besides the battery cable .....the stock unit has two wires connecting to the solenoid with spade terminals...one a bit wider than the other. However the new unit only has one of the wider spade terminals. What should I do...help is very much appreciated.<br>
<br>
Harry....<br>
<br>
ps: Luckily I've never had to change the starter before, but how do I get to the top bolt on the starter?

<p></p><i></i>

[Unknown]

(This post is missing and can not be restored)

<p></p><i></i>