Page 1 of 1
Engine Bay Wiring Lead route
Posted: Thu Aug 17, 2006 11:12 am
by Howie
In the absence of any pictures to refer to, can anyone tell me where the live battery lead that goes to the starter moter is routed on a sprint. Is it along the front of the subframe or the back of the subframe and also are the wires from the main loom routed alongside it?<br>
<br>
Thanks in advance<br>
<br>
Howard
<p></p><i>Edited by: <A HREF=
http://p206.ezboard.com/bthetriumphdolo ... omiteuk</A> at: 30/10/06 10:04 am<br></i>
Back and yes
Posted: Thu Aug 17, 2006 11:49 am
by Jon Tilson
Its all clipped together and the clips sit in mounting holes on the sub frame...then it bends round and heads for the starter...main feed, solenoid live and ballast feed.<br>
<br>
Jonners
<p></p><i></i>
Back and Yes
Posted: Thu Aug 17, 2006 12:10 pm
by Howie
Thanks Jonners, much appreciated.<!--EZCODE EMOTICON START :) --><img src=
http://www.ezboard.com/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END-->
<p></p><i></i>
Re: Back and Yes
Posted: Thu Aug 17, 2006 2:39 pm
by alun n
surely, its the front of the subframe?
<p></p><i></i>
Just to clarify...
Posted: Thu Aug 17, 2006 3:29 pm
by Jon Tilson
its the front of the subframe but the back side of it...<br>
The front of the front is under the valance...and you can see the wires wouldnt go that way...<br>
its obvious when you look at it from underneath.<br>
Jonners<br>
<p></p><i></i>
