2 piece weber manifold setup

[Hans ten Broeke]

Nice colour, Inca yellow , oh s##t its only the dustbin.

Hans

[speedracer]

Hi Jeroen,

The electric water pump is on all the time, its speed is controlled by a temp sender in the thermostat housing - because of this there is no stat in the system.
There is a separate booster water pump that circulates the flow from the manifold outlet through the heater circuit.

Glad you like the bin Hans - i might have to use part of it as a rear spoiler!

PS: I've taken a punt on the TR7 FI pump cover as it's only 5 quid (plus 8 quid to ship )

[Hans ten Broeke]

Here you can see a picture of a new complete set.
As you can see the set comes with a kind adaptor to use with the original pump cover.
The manifold is better than the most seen one, this manifold has exactly the same length of the runners, is a nice casting, and has the brake assistance line connected to all the 4 tubes.
A very good manifold for a TBI set up also.
If interested, of line please.

Hans

[speedracer]

Having real trouble getting in contact with PO to see if he forgot to supply that bit

Hans, do you have a part number for that adaptor?

[Hans ten Broeke]

There is no pn on this adaptor.

Hans