Toledo - where to look for problem areas?

Thinking of buying a Dolomite? Just bought one but don't know what to do next? This forum is specially for you!
Post Reply
Message
Author
PurposeUndefined

Toledo - where to look for problem areas?

#1 Post by PurposeUndefined »

Simple really, what are the main areas of concern for a toledo when considering rust?

& are there any other well known problems to look out for?

Thanks, Dan
User avatar
Toledo Man
Guest contributor
Guest contributor
Posts: 7542
Joined: Tue Oct 03, 2006 5:52 pm
Location: Halifax, West Yorkshire
Contact:

Re: Toledo - where to look for problem areas?

#2 Post by Toledo Man »

The main rot spots are the front wings (especially around the headlmaps), the sills, chassis rails and the rear arches. I'm sure somebody else will mention a few more rot spots.
Toledo Man

West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ

2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!

Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.

"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
grifterkid

Re: Toledo - where to look for problem areas?

#3 Post by grifterkid »

Check the door bottoms to ensure the drain holes have not become blocked and caused a rusty/crusty mess...!

Open up that bonnet and check the front scuttle area (where the windscreen washer jets are) as that little 'ditch' can be neglected and get filled with soggy old leaves and dirt thus causing the onset of our good old rusty enemy to start attacking...!!!

All I would recommend is be thorough and check (then double check!) everything you possibly can...! Check that all the electrics work properly, check that all the mechanical bits do everything they should. Then when driving it ensure that it 'feels' right and it travelling straight and true and is not making any weird clonks/rattles or squeaks (although they all do that a little bit!)...

As well as the body ensure you check the interior to be sure it is a comfortable, habitable place to be... You need to budget for work in that area if things are looking a little tired/tatty!

The more documentation the car has with it the better (especially more recent stuff) as you can see what has been done and then see what may need doing in the near future (this can be a good bargaining tool!)...

All I can say is be careful, try and not get over-excited (which is what I do!) and be as overly critical as you can... Remember you are buying a car and it is the sellers job to make you WANT to buy it so don't feel forced in to something you're not too sure of... :wink:

Now just go for it, good luck...
DoloWIGHTY

Re: Toledo - where to look for problem areas?

#4 Post by DoloWIGHTY »

Also check the base of the windscreen corners for filler as it is a well known area to rot out - tricky to repair too.
User avatar
DavePoth
TDC Member
Posts: 5723
Joined: Tue Oct 03, 2006 4:50 pm
Location: Next to my Computer

Re: Toledo - where to look for problem areas?

#5 Post by DavePoth »

Boot floor is a good one as well, especially under the fuel tank. Try and lift the front carpets to have a look at the driver and passenger floor pan too.
User avatar
sprint95m
TDC Member
Posts: 6502
Joined: Thu Aug 09, 2007 1:22 pm
Location: Caithness, Scotland

Dan.......

#6 Post by sprint95m »

The most crucial area is the sill structure. These rot along the bottom from the inside out.
To check for sill weakness, jack the car up on the end of a sill and try to open/close doors. If the doors now foul then the sills
are weakened.
Also if you see any holes at either end of a sill (under the wheelarch) then it will be necessary to rebuild the sill structure.
Beware of cover sills (or patched sills).
TDC Forum moderator
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.
Post Reply