Sprint Weber Manifold with 45's???

Message

IanMack · #1 Post by **IanMack** » Fri May 25, 2007 6:10 pm

Just a quick question!! Out of interest what would you (the sprint massive!!) pay for a pair of weber 45's with manifold and linkage??? Are 45's worth the hassle and cost of fitting??? Cant really find any information on them?? Cheers Ian

DavePoth · #2 Post by **DavePoth** » Fri May 25, 2007 7:00 pm

It's about Â£350 for the carbs and manifold, which is pretty much similar to the price of two weber 45s. Not much point unless you have lots of other goodies under the bonnet. But they sound ACE.

Dollyboy · #3 Post by **Dollyboy** » Fri May 25, 2007 10:16 pm

i paid less than that for a complete known to be running nicely engine, lightened flywheel, dms1 cam, webers, manifold and gearbox, but then again the seller was a pure k-nob.

IanMack · #4 Post by **IanMack** » Sat May 26, 2007 12:33 pm

Thanks for the information. Ive been offered apair of 45's with manifold and linkage set up for a dolly with fast road cam, for Â£325. So i assume thats about the right money. Not to sure what to do as i want to use the car on a regular basis, so would also need a cam, to match the webers!!! Think ive started down that long road of modifications!!!!!!!! Can you still get the STR91 cam or is it a case of piper/kent/newman cams??

USASPRINTMAN · #5 Post by **USASPRINTMAN** » Sat May 26, 2007 4:22 pm

Ian:

I bought a new STR91 from Jigsaw racing. It came in a box that said Newman Cams. You have to order the cam and it takes about 4 weeks. I hope to have my Sprint engined TR7 running in a few days.

I will be running HS8s on it, but I do have a Weber manifold. That'll go on after the engine is broken in and everything is sorted.

Cheers,
Richard

IanMack · #6 Post by **IanMack** » Mon May 28, 2007 11:06 am

USASPRINTMAN wrote:Ian:

I bought a new STR91 from Jigsaw racing. It came in a box that said Newman Cams. You have to order the cam and it takes about 4 weeks. I hope to have my Sprint engined TR7 running in a few days.

I will be running HS8s on it, but I do have a Weber manifold. That'll go on after the engine is broken in and everything is sorted.

Cheers,
Richard

Thanks for the reply Richard looking at your other thread seems your having fun at the moment!!! So is the STR91 a road/race cam??? When it is all together is it a combination that you could use as a daily driver???

Cheers

Ian