parcel shelf

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
1850RCU852S

parcel shelf

#1 Post by 1850RCU852S »

hi all,any one know if the front parcel shelf is the same on all dollys? thanks
DoloWIGHTY

Re: parcel shelf

#2 Post by DoloWIGHTY »

I need to check but my gut feeling says no.

The Dolomite 1300 and non 1500 I am pretty sure have a different part number to the HL and Sprint ones. I seem to remember that my Dolomite 1300 had a radio speaker inset into the parcel shelf on the passenger side.

I'll check my parts book tonight.

That said, they can't be fundamentally different I wouldn't of thought?
Jon Tilson
Guest contributor
Guest contributor
Posts: 11179
Joined: Tue Oct 03, 2006 9:45 pm
Location: Middlesex

Re: parcel shelf

#3 Post by Jon Tilson »

Pretty different are HL ones and flat plankers....

You could probably cut the non HL bits off a flat planker and cobble it in, but Ive never had one in good enough nick to bother.

Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
DoloWIGHTY

Re: parcel shelf

#4 Post by DoloWIGHTY »

Indeed. Here we go......

Image

and..

Image
1850RCU852S

Re: parcel shelf

#5 Post by 1850RCU852S »

thanks all, appreciated
Cook1e

Re: parcel shelf

#6 Post by Cook1e »

My 1500hl had a 1300 Dolomite one temporarily fitted when I picked it up last month with the original 1500HL one supplied but in need of repair and they are indeed different. Need to replace the hardboard base on mine, the fibre board upright bits and the trim at the front seem to be in reasonable order though. I'll just needc to cut a new one out of fresh hardboard and paint it black. I am toying with the idea of making a slightly stronger version out of 1/4 inch plywood....
Post Reply