Hi from a new owner!

[Rusty Toaster]

It's about time I introduce myself to the forum. I joined towards the end of last year to post some pictures of FOK 190L, the 1500 fwd that had ended up in Albert Looms' scrapyard, only to find I'd been beaten to it (I did try to buy that car, and the certificate of destruction had yet to be issued, but they wouldn't budge ).

So anyway, I'm Ben, 21 and from Norwich, although currently living in Derby. I've been obsessed with cars my entire life, classics being my main interest. I've spent the last 4 years without a car of my own because of astronomical insurance prices, coupled with no real need for one. Besides, I had 2 mopeds and access to my parents car!

On to the car I've bought then. It's a '72 1500 fwd (funnily enough), in glorious brown. I went to view it on Monday, and fell in love. I thought the car looked oddly familiar, turns out the seller only bought it last December, and I'd happened upon the advert for it a number of times (it is still up http://www.classiccarsforsale.co.uk/car ... 72/222112/). The guy paid the full £1100 for it, drove it 50 miles, and put it on ebay 3 months later. Apparently he hasn't got time to put it right, which is fair enough, as the big ends need replacing (I'll be needing help with that one!). The real kicker though? I won it for £390

Picking it up on Saturday (hopefully). Can't ****ing wait!

[Toledo Man]

Welcome to the forum.

You did well considering what the previous owner paid! There are 2 ways of doing the bearings and both involve separating the engine and gearbox so you can access the crankshaft to replace the bearings. You can either lift the engine leaving the gearbox in situ or you can remove the whole lot and separate the engine and gearbox once they're out of the car. You will need an engine crane and ideally, this needs to be done under cover (even a carport is better than nothing!). Please start a thread in the "restorations" section and keep us updated on your progress. Don't forget to include some photos.

I can supply you with the parts catalogue and workshop manual in PDF format. Please feel free to ask any questions if you need to pick our collective brains.

[DoloWIGHTY]

Hello Ben - WELCOME!

It was crying shame about FOK 190L but there you go.... .

However, this brown beauty looks full of potential, you obviously have the enthusiasm, we have the knowledge you need so we should all rub along really well.

Any questions you have (no matter how "trivial") please ask.

[Rusty Toaster]

Thanks for the warm welcome.

@Toledo Man whilst I have the necessary tools to replace the bearings (bar engine hoist! Either borrow my friends' dads' one or use block and tackle from sailing spares?) most of them are in Norwich! So I'll either limp the car the 140 miles home or put a shout out on here + retrorides for local (to Derby) assistance. I'll cross that bridge on Saturday. Resto thread + pics will follow.

Those PDFs would be handy, do I need to PM you my email address?

@DoloWIGHTY Cheers, and whilst I have had some experience with mechanics, I'm sure there'll be a few 'what on Gods earth does this thing do?!' type questions to come. I've never laid a finger on a welder, and am scared about fixing the holed sills, but I'm sure some advice + some practice will sort that.

[Rusty Toaster]

Just got back from picking the car up, it was... interesting. I'll start a resto thread after lunch!

[Toledo Man]

Ben, just PM me your e-mail address and I'll e-mail you the parts catalogue, the factory workshop manual or both.

[matt of the vivas]

Im in Norwich too..
Engine crane here if you need one, or help / advice.. Ive swopped a 1300FWD gearbox before, and its easier to take the whole thing out and split it on on the floor. Its a heavy beast though..
Matt.

[TrustNo1]

Im in Norwich too..
Engine crane here if you need one, or help / advice.. Ive swopped a 1300FWD gearbox before, and its easier to take the whole thing out and split it on on the floor. Its a heavy beast though..
Matt.

If doing a gearbox change it will be easier to take the whole lot out but if its only the engine that needs to be removed it is easier to leave the box in situ as you are not disturbing the drive shafts or donuts and it saves having to lift the very heavy gearbox.

[matt of the vivas]

Really??
I would have thought that providing your lifting gear is up to it, then removing the driveshaft inner couplings (easy) and the engine mounts (also easy) then lifting the whole lot out in one go is vastly preferable to trying to get to all the sump bolts in situ, also the hassle involved in trying to line up and get a decent seal with the gasket with the engine swinging from a hoist over the gearbox... shudders...
Ive pulled the whole lot out on a 1300FWD and its really no big deal. Would far rather do that and split it later than your way

[TrustNo1]

Only speaking form experience from having down more engine changes than I care to count, also lining back up is easy as there are locating lugs and no need for a hoist if you have a couple of mates.

New metalastic rotoflexes are £120 each which is another reason why I don't disturb them.

[Rusty Toaster]

@Toledo Man PM'd

@Matt of the Vivas I may well take you up on the offer of the crane + help, if you're up for it. I'm coming back to Norwich tomorrow, for a week, but taking the train so no engine lifting action for the time being. I'll be picking up my tools + nicking a few of my Dad's so that I can fix the wayward steering.


As for the debate whether or not to leave the gearbox in the car, I'd prefer the quicker/easier method, but it depends how big a risk there is of damaging the rotoflexes. Spending £240 on replacing broken bits is one thing, but spending that on something you break yourself would be pretty galling. Hmm


I'll put a video of the engine noises on the resto thread so people can give their prognosis.

[matt of the vivas]

Im always up for old car action....
Got most tools etc here the mortal remains of a 75 1500 TC for bits, if you need anything.

[Rusty Toaster]

@Matt Good to hear. I'll let you know when I'm thinking of bringing the car to Norwich, and check that you're not busy

[Sarah]

Hi Ben,
I've just bought a 1975 1500, also very happy and slowly learning with a lot of help from this forum.
Sarah

[Rusty Toaster]

Sarah- That's great to hear. This forum is a brilliant resource for new owners, I can vouch for that. You should start a thread in the resto section and post some pictures!