This is what I have - and a pattern fibreglass wing to go on, it's not a club panel.
Can anyone post or send me detailed pictures of how to go about fixing a grp wing to this?
Thanks in advance. IMG_3279 by edindundee, on Flickr
Tiger seal is good, actually really good stuff but Make sure the metal is clean or you could use Rivnuts or speed bolts personally I would use tigerseal but please do wear gloves.
Some people are like Slinky's, they serve no real purpose in life but bring a smile to your face when you push them down the stairs.
Dan has the right of it with Tiger Seal, but I also used a number of those self drilling self tapping bolts to get the fit and position correct. Then when I was happy with the fit, I removed the wing, put a good quantity of Tiger seal on all the joining flanges and refitted the wing with the bolts which then hold it secured while the Tiger seal sets. Once its all dried in place, you can, if you want, remove the screws and fill up the holes but I didn't bother, since they don't do any harm and I'm a belt and braces sort of guy!
Steve
I'll take some pics of how mine looks done, there aren't many of it in progress and none detailed. There may be some about of Aluns White Sprint which we did at the NEC restoration show, I didn't take any myself.....I was too busy doing it!
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!
Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.
IMG_3279 by edindundee, on Flickr
IMG_3278 by edindundee, on Flickr
IMG_3277 by edindundee, on Flickr
