help on if same parts fit on all years.

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
uk-dodge

help on if same parts fit on all years.

#1 Post by uk-dodge »

With just buying a dolomite dont know much on them but was Just wondering if someone could give me some advice

Ive been offered some parts of a dolomite. Front sub frame and steering column but he doesn't know what model year they came of. Mine is a 1976 auto 1500 did they change the front sub frames and also the steering columns. Did many parts change over the years dolomites were made.

If they did could someone tell me what other models will be the same steering column and subframe as mine.

Kind regards
Jon Tilson
Guest contributor
Guest contributor
Posts: 11179
Joined: Tue Oct 03, 2006 9:45 pm
Location: Middlesex

Re: help on if same parts fit on all years.

#2 Post by Jon Tilson »

There are 3 types of subframe and 2 types of column,
HL (and early dolomites and 1500TC's) cars all have the adjustable column.

Non HL Toledo and SE all have the fixed column.

Slant engined cars have 1 subframe, sprints are similar and the ohv cars are all a bit different
with a back extension with a gearbox support - carry over from fwd cars I assume.

So you need to know what it came from or put a pic up and we can tell you.

Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
1300_2door

Re: help on if same parts fit on all years.

#3 Post by 1300_2door »

According to the Dolomite parts book there are 4 (5 if you include the German Sprints) different front subframes, the 1500 auto is different to the 1500 manual .

The rest as Jonners said

Gordon
Post Reply