dos dolomite wheels fit 1300 fwd
-
northdave
dos dolomite wheels fit 1300 fwd
anyone know if dolomite alloys fit a 1300 fwd or dose spitfire wheels fit im after a set of alloys to fit my 1300 fwd
-
Jon Tilson
- Guest contributor
- Posts: 11179
- Joined: Tue Oct 03, 2006 9:45 pm
- Location: Middlesex
Re: dos dolomite wheels fit 1300 fwd
PCD wise yes but they will have the wrong inset....
Jonners
Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
-
Triumph1300
- TDC Member
- Posts: 1500
- Joined: Wed Sep 27, 2006 10:59 am
- Location: Coventry
Re: dos dolomite wheels fit 1300 fwd
You can bolt Sprint alloys on, but without some re-engineering, you run the risk of front end grip issues, and bump steer. Dependent on the car, you may also run into rear arch fouling issues.
The Green/Blue 1300's seen in the last issue of Dolly Mixture are running Rover 100 series alloys, which have the correct offset for the 1300, with additional width.
The blue car on the lattice alloys runs 3mm spacers on the front for ball joint clearance insurance.
3/8th wheel nuts are available to suit these rims.
The Green/Blue 1300's seen in the last issue of Dolly Mixture are running Rover 100 series alloys, which have the correct offset for the 1300, with additional width.
The blue car on the lattice alloys runs 3mm spacers on the front for ball joint clearance insurance.
3/8th wheel nuts are available to suit these rims.
BWJ
1966 Triumph 1300 Royal Blue
1966 Triumph 2000 Blue
1965 Triumph 2000 black and rust
1967 BSA B40wd green
2018 Jaguar E pace 2018
NOBODY expects the Canley Inquisition!
1966 Triumph 1300 Royal Blue
1966 Triumph 2000 Blue
1965 Triumph 2000 black and rust
1967 BSA B40wd green
2018 Jaguar E pace 2018
NOBODY expects the Canley Inquisition!