Inlet manifold to servo pipe connection thread.
Inlet manifold to servo pipe connection thread.
I am still trying to convert the vertical fitting to a right angle on the inlet manifold of my Sprint. It's 18 tpi and 0.620 diameter. Not sure though what thread that is ?
Mike
1980 Vermillion Sprint - 174bhp
1980 Vermillion Sprint - 174bhp
-
GrahamFountain
- Guest contributor
- Posts: 1735
- Joined: Sun Sep 08, 2013 3:35 pm
- Location: St Annes on Sea, Lancs.
Re: Inlet manifold to servo pipe connection thread.
Aren't they usually 5/8 inch UNF?
Graham
Graham
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.
Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).
Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).