1300 exhaust manifold

Message

brgjohn · #1 Post by **brgjohn** » Mon Feb 29, 2016 5:57 pm

does anybody know of a 4-2-1 exhaust manifold that would fit a 1300 Tolly?
I'm a wiz with a welder , but would like to know what to start with

Toledo Man · #2 Post by **Toledo Man** » Mon Feb 29, 2016 7:32 pm

You could try to adapt the Spitfire tubular manifold. It doesn't fit the Dolly/Tolly because it the subframe fouls it.

Edit: I was looking on Jigsaw's website and they're selling such a manifold for £205. Grab one while you can. That's cheaper than most of the Spitfire ones.

Carledo · #3 Post by **Carledo** » Mon Feb 29, 2016 8:48 pm

I would try getting a spitfire 4 branch, cut it off just below where the primaries join, so you have 2 2into1 parts, then try to marry up a double downpipe from a 1500 HL Dolomite to them. You might have to make a couple of intermediate pipes but it would be better than having to fab the whole thing. The secondaries on a Dolly are fearsomely convoluted!

Steve

brgjohn · #4 Post by **brgjohn** » Tue Mar 01, 2016 2:36 pm

thanks for your input guys

tom16v · #5 Post by **tom16v** » Thu Mar 03, 2016 9:52 am

I have a Spit 4 branch that is for sale if u want something to start with.
PM me if interested.

The Triumph Dolomite Club - Discussion Forum

1300 exhaust manifold

1300 exhaust manifold

Re: 1300 exhaust manifold

Re: 1300 exhaust manifold

Re: 1300 exhaust manifold

Re: 1300 exhaust manifold