Can anyone point me in the direction of the part numbers (perhaps even suppliers) of the white plastic or nylon shrouds for the single bullet connectors used on the Dolomite loom? I need the housings for both male and female connectors.
My parts book is with the car - at the MOT station.
Part # for bullet connector housings?
-
Jon Tilson
- Guest contributor
- Posts: 11179
- Joined: Tue Oct 03, 2006 9:45 pm
- Location: Middlesex
Re: Part # for bullet connector housings?
These are pin connectors in most cases, not bullets.
You need the Alun Nicholas ball pen refill trick to slide over the pin and push the lugs down so you can get them off....
Good luck finding new ones....I pinch mine from old looms
Jonners
You need the Alun Nicholas ball pen refill trick to slide over the pin and push the lugs down so you can get them off....
Good luck finding new ones....I pinch mine from old looms
Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
Re: Part # for bullet connector housings?
Wrong colour, but is the second link the correct item?
http://www.autosparks.co.uk/electrical- ... plugs.html
http://www.autosparks.co.uk/electrical- ... inals.html
http://www.autosparks.co.uk/electrical- ... plugs.html
http://www.autosparks.co.uk/electrical- ... inals.html
Re: Part # for bullet connector housings?
I'd say yes thats them. They make harnesses for dolomites and a pic on their site shows the black connectors instead of white.
Tony
Tony
Membership 2014047
Re: Part # for bullet connector housings?
Perfect, thanks Tony.tony g wrote:I'd say yes thats them. They make harnesses for dolomites and a pic on their site shows the black connectors instead of white.
Tony