Hi Dave, my 1850 has an occasional problem of the jet on the front carb being sticky. You can pull the choke; it starts fine but when it warms up it runs a bit rough. If you press upwards on the jet on the front carb there will be a click; and it will go back to its correct position. I've never found out why.
Tony.
Erratic idle (1850) - SOLVED
-
Toledo Man
- Guest contributor
- Posts: 7542
- Joined: Tue Oct 03, 2006 5:52 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: Erratic idle (1850)
FYI, my carbs are the non-waxstat type. I'm going to pull off the carbs anyway and replace the gaskets with the black instant gasket type sealant so I won't bother to find out if there is a leak. If nothing else, it will eliminate the carb mounts as the source of any air leaks.
Alun, you forgot about the other 2 Pythons (the Terrys).
Karl, I replaced the breather tubes recently so they should be fine.
Alun, you forgot about the other 2 Pythons (the Terrys).
Karl, I replaced the breather tubes recently so they should be fine.
Toledo Man
West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!
Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.
"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!
Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.
"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
-
Jon Tilson
- Guest contributor
- Posts: 11179
- Joined: Tue Oct 03, 2006 9:45 pm
- Location: Middlesex
Re: Erratic idle (1850)
Proper paper SU gaskets are the thing to use....with hylomar on the manifold side and a thin smear of grease on the other.
If that doesnt seal nothing will - you have distorted faces, probably on the carb adaptors.
That instant gasktet goey stuiff is that last thing you want anywhere near carbs....
Find the hiss with a tube in your ear. Then you will find out how to fix it.
Jonners
If that doesnt seal nothing will - you have distorted faces, probably on the carb adaptors.
That instant gasktet goey stuiff is that last thing you want anywhere near carbs....
Find the hiss with a tube in your ear. Then you will find out how to fix it.
Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
-
xvivalve
- TDC West Mids Area Organiser
- Posts: 13586
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Re: Erratic idle (1850)
No I didn't!
-
Toledo Man
- Guest contributor
- Posts: 7542
- Joined: Tue Oct 03, 2006 5:52 pm
- Location: Halifax, West Yorkshire
- Contact:
Re: Erratic idle (1850)
Jonners, you were right. There was an air leak with one of the mating faces of the carb mounts. I also take your point about the instant gasket stuff but it is only a problem if you use too much. I just did a thin bead so it will be fine. It will do until I get some solid carb mounts. I've put together a video and I've posted it to YouTube. Sealing the mounting faces of the carb mounts has cured the problem.
Toledo Man
West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!
Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.
"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ
2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!
Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.
"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
Re: Erratic idle (1850)
Solid carb mounts for your's are in stock Dave!
James
James
Re: Erratic idle (1850)
Yes you did, you invaded Poland!xvivalve wrote:No I didn't!
Tony
Membership 2014047
-
xvivalve
- TDC West Mids Area Organiser
- Posts: 13586
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Re: Erratic idle (1850) - SOLVED
Excuse me, is this the right place for an argument?
-
Mad Mart
- TDC Member
- Posts: 8532
- Joined: Tue Oct 03, 2006 5:48 pm
- Location: Winscombe, North Somerset, England
- Contact:
Re: Erratic idle (1850) - SOLVED
I've told you once!
Sprintless for the first time in 35+ years. 
... Still Sprintless.
Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
2012 Porsche Boxster 981 S
... Still Sprintless.Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
2012 Porsche Boxster 981 S
-
Jon Tilson
- Guest contributor
- Posts: 11179
- Joined: Tue Oct 03, 2006 9:45 pm
- Location: Middlesex
Re: Erratic idle (1850) - SOLVED
That's not an argument, its just contradiction.
Jonners
Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.