My First Post - I've been offered an 1850HL

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
User avatar
Bumpa
TDC Member
Posts: 691
Joined: Fri Apr 15, 2016 11:08 am
Location: Ayrshire, Scotland

My First Post - I've been offered an 1850HL

#1 Post by Bumpa »

Hello everyone. I'm not new to classic cars, but am new to the Dolomite. My brother-in-law has a 1977 Dolomite 1850HL. Up until 1992 it was in regular use and he looked after it well, Waxoyling the body etc. I believe it has only covered about 45,000 miles. Since 1992 it has lain in his garage. The garage is dry but cold, as he lives in the NE of Scotland.

When we were visiting him last week I went to have a look at the car. It is in absolutely original condition with no mods from standard at all. The body appears to be in good condition, as much as I could see by crawling around with a torch. The rear arches aren't rusty, the doors appear sound, as do the sills. I know it has never seen a welding torch. Some of the bright trim on the sides is off, but he has the pieces.

It is filthy dirty and it is hard to tell if there are any rust bubbles on the top of the wings for example. The interior is all intact but in need of a good clean. The seats are not ripped or worn and are surprisingly comfortable. It has a period radio/casette with a speaker on the back shelf!

I'm told that there is an issue with the gearbox in that it jumps out of gear. It doesn't have an overdrive, which is a shame. The engine is not seized but shows signs of having some fairly major oil leaks and I would want to strip it and check it over. Obviously all the brakes would have to be renewed, hydraulics and pads at least. The tyres would also need renewing.

The thing is, he is willing to let me have the car for nothing - that's right, nowt. What pitfalls can I expect if I decide to take it on? I am well experienced in old car rebuilds having done my MGB GTV8 from a wreck, a Midget using a new shell, and recently a Lotus Elan Sprint from a pile of parts. So there aren't many jobs that would faze me.

What should I look out for? How tricky would it be to find and fit an overdrive?
Mike
(1969 MGB GTV8, 1977 Dolomite 1850HL, 1971 MGB roadster now all three on the road)
Jon Tilson
Guest contributor
Guest contributor
Posts: 11179
Joined: Tue Oct 03, 2006 9:45 pm
Location: Middlesex

Re: My First Post - I've been offered an 1850HL

#2 Post by Jon Tilson »

Welcome....

Have it....

Overdrive box is a doddle mechanically, in that you just need the box and a cross member. Trouble is they are no longer that common and could cost you around 450 quid.

If the engine is toast get a TR7 one. Plenty about.

Nothing we cant guide you through on here. Start a resto thread and have a look at some of the threads already there.
I guess your first steps are a clean and see if the engine is seized. Then maybe try and get it running from a gallon can, clean out the
fuel system, replace rubber joining sections on the fuel pipe, sort out the hydraulics and get it moving.

Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
triumphdolomiteuk
Site Admin
Site Admin
Posts: 1968
Joined: Tue Sep 19, 2006 5:50 pm
Contact:

Re: My First Post - I've been offered an 1850HL

#3 Post by triumphdolomiteuk »

Never mind wasting time asking questions, just take it home and have some fun with it! :D It sounds like it wouldn't take much effort/money to recommission.
Please note that I am simply a Forum administrator, so please do not contact me unless your question is regarding your Forum account. For general enquiries regarding the Club and its services (membership queries, questions about spares, lapdancing etc) please see https://forum.triumphdolomite.co.uk/vie ... hp?t=20098

Are you enjoying using our forum? If so why not support the owners club which provides it by joining The Triumph Dolomite Club? Help us to preserve these great cars for future generations.
Club membership costs just £30 for one year or £55 for two years. See https://forum.triumphdolomite.co.uk/vie ... =4&t=37824 for details.
User avatar
Mahesh
Guest contributor
Guest contributor
Posts: 1293
Joined: Wed Jul 22, 2015 12:58 pm
Location: London

Re: My First Post - I've been offered an 1850HL

#4 Post by Mahesh »

Sounds like a bargain, and with your previous experience and the forum, shouldn't be a problem.

Seen people pay a lot more for a lot less.
NRW 581W Sprint


On the motorway no one can hear me sing!
Construed as a public service, self preservation in reality.
GTS290N
TDC Member
Posts: 1022
Joined: Fri Jan 08, 2016 9:00 pm

Re: My First Post - I've been offered an 1850HL

#5 Post by GTS290N »

Do not under any circumstances go near that car. :o
Tell me where it is and I'll take it. :lol:
Enjoy, it's much better than an MGB. :D
tamtrucks
Guest contributor
Guest contributor
Posts: 765
Joined: Wed Oct 23, 2013 8:10 pm
Location: NORTH NOTTS

Re: My First Post - I've been offered an 1850HL

#6 Post by tamtrucks »

go for it :D and welcome to forum
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
User avatar
Toledo Man
Guest contributor
Guest contributor
Posts: 7542
Joined: Tue Oct 03, 2006 5:52 pm
Location: Halifax, West Yorkshire
Contact:

Re: My First Post - I've been offered an 1850HL

#7 Post by Toledo Man »

Welcome to the forum. You should definitely take it. The mechanicals are easy to sort and all perishable items will need replacing so you will need to overhaul the brakes, clutch and fuel systems.

Don't be afraid of asking any questions. You've come to the right place for help and advice. Don't forget to join the Club. It is worth every penny of the membership fee. I'm looking forward to seeing your "resto" thread. There is also a Dolly Wiki which answers some questions that are asked a lot. Don't forget to put up some photos.
Toledo Man

West Yorkshire Area Organiser
Meetings take place on the first Wednesday of the month at 8.00pm at The Railway, 1 Birstall Lane, Drighlington, Bradford, BD11 1JJ

2003 Volvo XC90 D5 SE (PX53 OVZ - The daily driver)
2009 Mercedes-Benz W204 C200 CDI Sport (BJ58 NCV - The 2nd car)
1991 Toyota Celica GT (J481 ONB - a project car)
Former stable of SAY 414M (1974 Toledo), GRH 244D (1966 1300fwd), CDB 324L (1973 1500fwd), GGN 573J (1971 1500fwd), DCP 625S (1977 Dolomite 1300) & LCG 367N (1975 Dolomite Sprint), NYE 751L (1972 Dolomite 1850 auto) plus 5 Acclaims and that's just the Triumphs!

Check my blog at http://triumphtoledo.blogspot.com
My YouTube Channel with a bit of Dolomite content.

"There is only one way to avoid criticsm: Do nothing, say nothing and BE nothing." Aristotle
AndyJ

Re: My First Post - I've been offered an 1850HL

#8 Post by AndyJ »

Grab the car and join the club too! As you are probably already aware a good body is the best possible starting point for entry classics such as the Dolomite, the mecahnicals being relatively cheap and only rarely costing more than a decent car is worth. Not sure where you are but the chances are there's help nearby if you can't solve problems you encounter on here. Dolomites drive very well and keep up with modern traffic too, especially the larger engined ones.
What's to lose?
Andy.
tamtrucks
Guest contributor
Guest contributor
Posts: 765
Joined: Wed Oct 23, 2013 8:10 pm
Location: NORTH NOTTS

Re: My First Post - I've been offered an 1850HL

#9 Post by tamtrucks »

any dolomite is worth saving :mrgreen:
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
tractor boy

Re: My First Post - I've been offered an 1850HL

#10 Post by tractor boy »

Go for it and enjoy the fun I have an 1850hl but with overdrive definitely a worthwhile mod. Join the club and the forum they are great and have been a great help to me. A smashing set of guys. Tractor boy. NCB 128R
Lee1500

Re: My First Post - I've been offered an 1850HL

#11 Post by Lee1500 »

Definitely go for that! The layer of dust has probably helped protect it. 1850s drive really nice. The lack of overdrive isn't the end of the world. It would be worth just getting the engine running before diving in to dismantle it. Good luck.
Post Reply