My seats

[tony g]

Got some mgf seats in black cloth with no logos or odd coloured piping


Mgf seats by tg1mm, on Flickr

Tony

[tony g]

Handbrake trim is being changed lol

Mgf by tg1mm, on Flickr

Tony

[toromod]

that looks ok, was it an easy fit?

[tony g]

Cheers. Not a bolt in fit but my fabricator cut off mg lugs and welded some box section and lugs to suit. Nice to sit in and I don't fall out when going round corners lol

Tony

[matienzo]

Now they really do look smart. Nice one.

[Mahesh]

Looking good

[toromod]

time to start checking mgf ads!

[cliftyhanger]

I fitted MGF seats years ago, and can confirm they are excellent. Very supportive and way way better when I was doing 12 car rallies etc. Plus mine were a tenner off ebay

I also swapped the sides of the seats, so I now sit in what was the passenger seat. I think because the original drivers seat had more wear, but not a lot. Maybe the way the adjuster fitted too?? My memory fades on that detail.
IIRC all I did was weld some plates to the edge of the runners and drilled holes to match the old fixing points, really simple.

[toromod]

I fitted MGF seats years ago, and can confirm they are excellent. Very supportive and way way better when I was doing 12 car rallies etc. Plus mine were a tenner off ebay

I also swapped the sides of the seats, so I now sit in what was the passenger seat. I think because the original drivers seat had more wear, but not a lot. Maybe the way the adjuster fitted too?? My memory fades on that detail.
IIRC all I did was weld some plates to the edge of the runners and drilled holes to match the old fixing points, really simple.

Sounds even more like a good plan