how to remove the rear wing chrome trim/window side..now with pic

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
tamtrucks
Guest contributor
Guest contributor
Posts: 765
Joined: Wed Oct 23, 2013 8:10 pm
Location: NORTH NOTTS

how to remove the rear wing chrome trim/window side..now with pic

#1 Post by tamtrucks »

hi all
how do you removes these things
Image
thanks for now...nic
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13582
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

Re: how to remove the rear wing chrome trim/window side..now with pic

#2 Post by xvivalve »

Carefully prise upwards from the rear; there should be a push fit peg on the underside that secures it, the top is merely trapped under the trim above.
tamtrucks
Guest contributor
Guest contributor
Posts: 765
Joined: Wed Oct 23, 2013 8:10 pm
Location: NORTH NOTTS

Re: how to remove the rear wing chrome trim/window side..now with pic

#3 Post by tamtrucks »

nice one,sound simple :lol: just incase would you know what clips are holding it on?
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13582
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

Re: how to remove the rear wing chrome trim/window side..now with pic

#4 Post by xvivalve »

None. The peg fits into a hole on the bodywork and the trim above fits over a recess cast into the top of the finisher. The underside is usually packed with a non setting sealant. I'll look one out and photograph it so you know what you are dealing with...
tamtrucks
Guest contributor
Guest contributor
Posts: 765
Joined: Wed Oct 23, 2013 8:10 pm
Location: NORTH NOTTS

Re: how to remove the rear wing chrome trim/window side..now with pic

#5 Post by tamtrucks »

nice one,thanks for that
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
Post Reply