parts help

[D16PJM]

I may be wrong but i have been doing the master cylinder on my clutch and have a bit of an issue, first issue is the master cylinder i bought has the wrong attachment and will not fit the pedal, i have been able to remove the old one and put on the new cylinder as they are only held in by a cir-clip. all good

my car has a remote reservoir and i had an issue getting the pipe out, it is now out but i am sure a see a post saying the club now do these pipes, i have a braided line to the slave cylinder but looking at possibly changing the pipe from the reservoir to the master.

am i imagining this or are these pipes available

Pete

[triumphdolomiteuk]

https://forum.triumphdolomite.co.uk/vie ... =4&t=34664

[D16PJM]

That is exactly what i need

[D16PJM]

Do we get these through the club or direct from Alun.

Pete

[triumphdolomiteuk]

I'm not quite sure but try Club Spares first and they can alway refer you to Alun if necessary.
We also have stainless steel cutch hoses for all model; https://forum.triumphdolomite.co.uk/vie ... =4&t=34537