Dolomite 1500 wheel cylinder types.

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Message
Author
GlenM
TDC Member
Posts: 445
Joined: Sun Nov 16, 2014 12:46 am
Location: Midhurst, West Sussex.

Re: Dolomite 1500 wheel cylinder types.

#16 Post by GlenM »

Richard the old one wrote: Mon Mar 23, 2020 10:16 pm Edition 6 of the Official Triumph dolomite 1500HL handbook gives the 10mph engine revs as being 594 for the 3.89:1 rear axle and 554 for the later 3.63:1 axle. These figures are for a car without overdrive with OD they drop to 473 and 441. So if your car is non O/D you have an early 1500 axle fitted as 594 x 5 = 2970.
Richard,

That's great, thanks. It's a '78 registered car, so it might well be the earlier axle, not sure when they changed. At least it's not a 1300 CW&P.

Glen.
Richard the old one
TDC Member
Posts: 1218
Joined: Thu Sep 28, 2006 10:06 pm
Location: Bristol

Re: Dolomite 1500 wheel cylinder types.

#17 Post by Richard the old one »

I think the change did not come in until about 1980.
Post Reply