Intermediate shaft
Intermediate shaft
Finally got round to attempting to replace the lower steering coupling which I refurbed with poly bushes to find the intermediate shaft splines all chewed up, question is where is the best place to buy ?
-
Carledo
- TDC Shropshire Area Organiser
- Posts: 7247
- Joined: Sun Aug 21, 2011 5:12 pm
- Location: Highley, Shropshire
Re: Intermediate shaft
Fitchetts keep them - and they are NOT closed, despite their website saying so! I was in there today, give them a bell!
Steve
Steve
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!
Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!
Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.
Re: Intermediate shaft
No reply from Fitchetts im afraid so ordered from Robsport with a 10% TDC discount 
Oh.....
What had happened to it to cause this?
Had you had a pressed joint fitted previously?
Ian.
TDC Forum moderator
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.
PLEASE help us to maintain a friendly forum,
either PM or use Report Post if you see anything you are unhappy with. Thanks.
Re: Oh.....
No Ian i had a Rimmers one which fell apart after 18 months ( i may have tried to fit a pressed one many moons ago and then junked it but im sure i went with the original design in the end
) and then a good second hand one i had in the garage which was starting to show some play hence me changing for the poly bushed one, the intermidiate shaft that needs replacing is probably the original as i have never changed it.