Trigger wheel fitting help ?

[Pen]

Has anyone fitted a trigger wheel to a sprint , the trigger ring /wheel I can see to fit will only be bolted onto the outer flexi part of the wheel and would leave it not totally accurate for a crank sensor , has anyone fitted one for ignition type change to such as megajolt
Cheers

[new to this]

Hi i bought my trigger wheel from trigger wheel.com,i fitted the trigger wheel on the inside of the crank pulley,i drilled and tap the pulley ,then made a bracket which bolted to the engine block using the timing quradant bolts and the crank sensor bolted to that

Dave

P.s Also fitted audi TT coil packs in place of original spark plug leads,not fully wired every thing up yet

[Mad Mart]

I welded mine on the inside of the pulley. It worked fine and is still going strong afaik.

[Pen]

So by the looks of it you guys fixed to the flexi outer part so it’s not a problem ,that’s great news cheers very helpful

[Mad Mart]

Can you see the images I posted only they don't show on my PC?

[Awaiting Repair]

Can you see the images I posted only they don't show on my PC?

No, can't see them here......

[Pen]

I can see them cheers , I see your set at 90deg before tdc (something I wasn’t 100% as I’ve not done this before ) also like the bracket looks a tidy spot to mount

[TrustNo1]

I'm just in the process of fitted EDIS on one of my 1500s, just waiting for the trigger wheel to be made and fitted to the pulley

[X-pat]

I welded mine on the inside of the pulley. It worked fine and is still going strong afaik.

Hi Martin,

If I remember right, you were running this set up on your Sprint with twin 45s. I just wondered what TPS you used. There is not much clearance at the front of that manifold as the thermostat housing gets in the way.

Andrew

[Mad Mart]

Hi Andrew. I was given a TPS from a Ford Mondeo, I believe (not that you'll find one of those over there). It's just a 3 wire sensor. I fabricated a mounting bracket and cobbled something together to attach it to the left-hand carb throttle spindle (nearest the bulkhead/fire wall).

[X-pat]

Mondeo - perfect! I will see what I can find here!