SuperPro anti roll bar bushes

[bergxu]

Hi gents,

Anyone else used the front anti roll bar bushes from them? I’ve completed my front and rear suspension overhaul and so finally got round to fitting the front ARB bushes and I noticed that the SuperPro ones are slightly wider than what came out and won’t fit inside the inner brackets. The old bushes measured about 1-3/8” wide and the new ones are 1-5/8”. I got them from Robsport so I’ve got an email into them but was just wondering if anyone else has run into this. They’re for the 21mm bar which is correct for my car and so I assumed the bushes were the same width regardless of whether you have the 21 or 24mm bar. Thanks I’m advance.

Aaron

[marshman]

Totally rebuilt my Sprint front subframe/suspension about 18 months ago. I used Super Pro bushes from Robsport. Initially I had the bigger 24mm roll bar bushes (- wasn't aware there were different sizes!) - Robsport swapped them for the correct 21mm ones and they fitted my car OK - no issues. On the whole front end the only bushes that were difficult to get to fit/sit right were the ones on the steering rack mounts.

Roger

[bergxu]

I presume you had no issues with the width of the bushes and the brackets? Maybe the set I got were packaged wrong..

[marshman]

No problems at all, the fit was good as you can see from the photo. Hardest bit was getting the outer bracket to stay hooked over the inner while I fitted the bolts.

[TrustNo1]

Thats why I only use Chris Witor, never had an issue with Superflex bushes.

[bergxu]

Well, I used SuperPro because I’ve got them in my TR6 and love the ride as they’re among the most compliant polybushes I’ve ever used so wanted to go that route in the Sprint as well but strange that the ARB bushes won’t fit.

Much as I can appreciate Chris Witor as I also have a 2500S Estate, he’s not been responsive at all when I’ve made inquiries to him. Maybe he doesn’t want to deal with sending bits to the US, who knows, but I’ve given up on him.

[Galileo]

That's not the only thing that gives up when using hard Super Pro bushes, so does your suspension due to metal fatigue. I've never had a problem ordering off the Chris Witor website myself and can only echo Justin's words.

[bergxu]

The SuperPro bushes are quite the opposite. I’ve tried many different polybushes over the years and theirs are among the softest/most forgiving I’ve seen yet, which is another reason why I chose them as I am aware that the hard poly stresses the Dolly suspension mounting points.

[GlenM]

I ordered a full car set of Superflex bushes from Chris Witor before Christmas. They were very helpful with a query by e-mail and the bushes arrived very quickly once I had ordered them from the web-site.

As I understand it, these bushes are supposed to vary in Shore rating according to whereabouts on the car they are fitted.

[bergxu]

The SuperPro ones are also varied in duro/shore rating. I checked with them direct before I made the order with Robsport.

[bergxu]

FWIW, car is back together. I bent the inner brackets open just a hair and the bushes went right in. Weird that I needed to do that but was barely 1/8 of an inch off. Nevertheless, ride and handling are once again restored. Also fitted new ARB end links as had a broken one. One more job done!

.