Hi I’d like to know how to Set the preload on a Sprint rear axle pinion with a new collapsible spacer, I have the spacer and new nut, but would to know how to set the preload as we are changing the nose bearing.
Thanks
Setting preload on a Sprint rear axle pinion
-
clubbyal79ch
- TDC Member
- Posts: 44
- Joined: Fri Oct 13, 2017 2:31 pm
-
cleverusername
- Guest contributor
- Posts: 1560
- Joined: Mon Dec 03, 2012 6:04 pm
Re: Setting preload on a Sprint rear axle pinion
https://forum.triumphdolomite.co.uk/vie ... hp?t=17796
This thread tells you what to do and it looks very very complicated.
This thread tells you what to do and it looks very very complicated.
Re: Setting preload on a Sprint rear axle pinion
It's all in the manual.
The methode in the thread of the link isn't usefull. When only the seal has been changed once in it's life and that did happen probably once or more then a mark say's nothing, not to talk about when the diff was taken apart before...
The methode in the thread of the link isn't usefull. When only the seal has been changed once in it's life and that did happen probably once or more then a mark say's nothing, not to talk about when the diff was taken apart before...
Classic Kabelboom Company. For all your wiring needs. http://www.classickabelboomcompany.com
-
clubbyal79ch
- TDC Member
- Posts: 44
- Joined: Fri Oct 13, 2017 2:31 pm
Re: Setting preload on a Sprint rear axle pinion
Which manual?
-
cleverusername
- Guest contributor
- Posts: 1560
- Joined: Mon Dec 03, 2012 6:04 pm