Dolomite 1850/Sprint front seat wires

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
User avatar
Yellow Banana
TDC Member
Posts: 462
Joined: Sat Oct 07, 2006 8:40 pm
Location: Plymouth,Devon

Dolomite 1850/Sprint front seat wires

#1 Post by Yellow Banana »

Hi all. Are the front seat squab rubber strap retaining wires still available any where? One of my seats I'm hoping to get recovered the rubbers are slack due to the wires failing. (see pic)

Image
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13580
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

Re: Dolomite 1850/Sprint front seat wires

#2 Post by xvivalve »

Never seen a Sprint seat looking like that, there's usually a rubber diaphragm that stretches front to rear and side to side clipping into holes punched into the tubular frame. We had these diaphragms remanufactured a few years ago and I believe we have plenty of stock. If your frame has the holes, and they're in the correct places, one of those would sort you out
User avatar
DOLOMITE 135
TDC Member
Posts: 122
Joined: Sun Oct 22, 2006 10:31 am

Re: Dolomite 1850/Sprint front seat wires

#3 Post by DOLOMITE 135 »

Never seen a Sprint seat looking like that, there's usually a rubber diaphragm
The photo shows the rear of the seat back with the outer cover off (note the white cover for the head restraint post at the top), not the base (or seat squab). The seat backs do use Pirelli webbing unlike the seat base which as you state use a rubber diaphragm.
Are the front seat squab rubber strap retaining wires still available
Is it the wires or has the Pirelli webbing lost it's elasticity?
BobM
TDC Member
Posts: 36
Joined: Mon Apr 20, 2015 9:47 pm

Re: Dolomite 1850/Sprint front seat wires

#4 Post by BobM »

Hi,
This is the seat back (squab) that is the problem here. The diaphragm supports the base cushion.
These wires give support to the sides and give the back it's shape. Made of hardened wire they hold their shape well but can break. Although originally available as replacement parts, I would be amazed if anyone has held on to them. The more common problem is a loss of tension in the webbing.

The most likely source will be a scrap seat.

Best of luck.

BobM
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13580
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

Re: Dolomite 1850/Sprint front seat wires

#5 Post by xvivalve »

DOLOMITE 135 wrote: Wed Mar 09, 2022 2:02 pm
Never seen a Sprint seat looking like that, there's usually a rubber diaphragm
The photo shows the rear of the seat back with the outer cover off (note the white cover for the head restraint post at the top), not the base (or seat squab). The seat backs do use Pirelli webbing unlike the seat base which as you state use a rubber diaphragm.
Are the front seat squab rubber strap retaining wires still available
Is it the wires or has the Pirelli webbing lost it's elasticity?
Of course! Silly me, concentrated on the picture rather than the words. :roll:
Post Reply