Sprint Vacuum advance

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
User avatar
GrahamFountain
Guest contributor
Guest contributor
Posts: 1735
Joined: Sun Sep 08, 2013 3:35 pm
Location: St Annes on Sea, Lancs.

Sprint Vacuum advance

#1 Post by GrahamFountain »

Other than by testing the vacuum advance unit, e.g. by sucking on the tube and seeing the points plate move, how would you know that it wasn't working?

So, I suppose the question really is, how big is the effect on fuel consumption, in various conditions like long runs and at steady speed?

Graham
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.

Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).
Magenta Auto Sprint
Guest contributor
Guest contributor
Posts: 1034
Joined: Sun Jul 19, 2009 11:41 pm
Location: Silsoe, Beds

Re: Sprint Vacuum advance

#2 Post by Magenta Auto Sprint »

I had problems with my 1300 Distrbutor, I tested the vacumn unit off the distributor and also made sure that the mounting plate rotated freely, in my case the plate was siezed.

Suck on the vacum unit to see if it moves .

Malcolm
User avatar
GrahamFountain
Guest contributor
Guest contributor
Posts: 1735
Joined: Sun Sep 08, 2013 3:35 pm
Location: St Annes on Sea, Lancs.

Re: Sprint Vacuum advance

#3 Post by GrahamFountain »

"Eppur si muove", as [the other] Galileo said. The question is, other than being a sucker, how would one tell if it didn't move?

Graham
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.

Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).
Post Reply