Just got a replacement Sprint crank off ebay, after measurement I have determined it has had one previous grind, it has been ground by 10 thou.
The mains aren't smooth, so it needs to be ground again. So i was wondering if anyone could recommend a good machine shop in the Yorkshire area that could do it.
Crank grind Leeds area
-
cleverusername
- Guest contributor
- Posts: 1560
- Joined: Mon Dec 03, 2012 6:04 pm
-
yorkshire_spam
- Guest contributor
- Posts: 994
- Joined: Wed Nov 15, 2017 3:35 pm
- Location: Filey, North Yorkshire
Re: Crank grind Leeds area
All of my engineering (crank, head, block) for the 1500 was done at Bill Browns in Halifax. Been using them for 20+ years, never had any issues.
https://goo.gl/maps/HyS4XGmvAnjwrhrb6
https://goo.gl/maps/HyS4XGmvAnjwrhrb6
-
cleverusername
- Guest contributor
- Posts: 1560
- Joined: Mon Dec 03, 2012 6:04 pm
Re: Crank grind Leeds area
Thanks, I will give him a call and see when he can fit it in.yorkshire_spam wrote: ↑Mon May 30, 2022 8:35 pm All of my engineering (crank, head, block) for the 1500 was done at Bill Browns in Halifax. Been using them for 20+ years, never had any issues.
https://goo.gl/maps/HyS4XGmvAnjwrhrb6