Glovebox light wiring

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
TerryC
TDC Member
Posts: 13
Joined: Tue Dec 05, 2023 2:39 pm

Glovebox light wiring

#1 Post by TerryC »

Hello all,
I Have managed to find a glovebox light for my1300 cc dolly and would like to wire it in. I have tried but I cant get the light to turn off when I shut the glovebox door. The ever present switch is there and working.
Can someone please tell me where I am going wrong and also a simple wiring diagram would help.
Many Thanks
T
User avatar
Mad Mart
TDC Member
Posts: 8529
Joined: Tue Oct 03, 2006 5:48 pm
Location: Winscombe, North Somerset, England
Contact:

Re: Glovebox light wiring

#2 Post by Mad Mart »

Can you make a sketch or describe how you've wired it?
Sprintless for the first time in 35+ years. :boggle2: ... Still Sprintless.

Engines, Gearboxes, Overdrives etc. rebuilt. PM me.


2012 Porsche Boxster 981 S


Image
Carledo
TDC Shropshire Area Organiser
Posts: 7242
Joined: Sun Aug 21, 2011 5:12 pm
Location: Highley, Shropshire

Re: Glovebox light wiring

#3 Post by Carledo »

Wiring is dead simple, take a fused permanent live feed (purple wires on fusebox, or in loom) to one side of the bulb then run an earth from the other side of the bulb to the switch.

HOWEVER, this may not work as the switch was not put there to operate a light, but to give a little spring assistance in opening the glovebox! I know right! As such, the switch isn't mounted in anything metal so won't earth, you might need to solder a wire to the back of the switch body and earth THAT to make it work.

HTH, Steve
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!

Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.
TerryC
TDC Member
Posts: 13
Joined: Tue Dec 05, 2023 2:39 pm

Re: Glovebox light wiring

#4 Post by TerryC »

Thanks guys for the replies. I had totally wired wrong.
I did as you suggested Steve and I now have Dolly with a Glovebox light.
Thanks again
T
Post Reply