How many spares do you have?

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
2F45T4U

How many spares do you have?

#1 Post by 2F45T4U »

Me and Rich are now getting another lock up purely for Dolly spares! Which got me thinking, what kind of spares do you have.

I have....

1500 engine Knocking
1850 engine Knocking, water pump seeping
tr7 engine in pieces
tr7 engine Number 1 and Number 4 spark plug threads ripped out!
tr7 engine A runner but a bit noisey
sprint engine Good runner
sprint engine Good runner
Rover V8 (George we need to talk!) In bits, going to be rebuilt

1500 gear box Fine
1850 gear box second gear synchro is a bit low but a good box
Sprint gear box Yet to have driven on it
LT77 gear box (George we still need to talk!) Same as above

1300 subframe Very rusty
1500 subframe Bent
1850 subframe Fine
sprint subframe Fine
sprint subframe Fine
Modified 1850 subframe to take Rover V8 (George?) Fine

1300 back axle, dead
1850 back axle, dead
1850 back axle, alive!
Sprint back axle Fine
Sprint back axle Fine

The engines, subframes, gear boxxes and axles are a mix of whats on a car and whats off. As there all in the middle of being swapped!

3 bonnets, 1 red, 1 green one blue and very dented

2 bits of front panel,

1 crap drivers front wing

2 sets of glass, one tinted one not

And I've now forgotten what else I have, cool huh 8)

Your turn



Edit - I've added next to the parts, why they are indeed spares :lol:
Last edited by 2F45T4U on Thu Jul 05, 2007 8:00 am, edited 1 time in total.
HolgerS

Re: How many spares do you have?

#2 Post by HolgerS »

2F45T4U wrote:.... And Iv'e now forgotten what else I have, cool huh 8)

Your turn
So I can come along with a big van and take everything you have forgotten :wink:

Seems that my spares are tiny compared to yours. Most of my stuff is for Spitfire and TR anyway and no big pieces like engines, gearboxes or subframes are left anymore after the last clean up and selling action.
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13592
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

#3 Post by xvivalve »

Sounds to me you have a lot of scrap there Adam; I'd weigh a load in before paying extra to store it...else you'll end up like me.

My advice; be ruthless. My rule now is if I wouldn't use it on/in a car why is anyone else likely to?
2F45T4U

#4 Post by 2F45T4U »

Yer true. It'll all get looked through soon
1300dolly

#5 Post by 1300dolly »

Yep get rid of the scrap bits that you will never need
When i get a spare week to drive around southampton i will list the spares i have. i cleared out a whole garage a few months ago and most of it was binned.
Im now down to 1 single lockup , a double garage (shared) ,a triple garage (shared and going to have a car put into it soon) , a loft full and , a garden which resembles a breakers yard , a large shed soon to be ordered.oh and 1 car and 1 motorbike with some parts stored at work.
I also use on of the fwd's as a storage shed :lol:
Jon Tilson
Guest contributor
Guest contributor
Posts: 11179
Joined: Tue Oct 03, 2006 9:45 pm
Location: Middlesex

Weigh in...

#6 Post by Jon Tilson »

The 2 low order sub frames, the 1300 axle and the knocking 1500, less head, which will sell to a spit jock...

The 1300 half shafts...hmmm maybe keep em, but I'd bin them too.

Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
User avatar
David6214
Guest contributor
Guest contributor
Posts: 5154
Joined: Tue Oct 03, 2006 10:57 pm
Location: South Coast
Contact:

#7 Post by David6214 »

couple of light bulbs and a bumper....
Previous owner of 42 Dolomite shaped vehicles, 14 Sprints, 12 1850s, 8 1500s, 3 V8s, 3 Toledos and 2 SEs
User avatar
Jod Clark
Guest contributor
Guest contributor
Posts: 2567
Joined: Tue Oct 03, 2006 7:38 pm
Location: Birmingham

#8 Post by Jod Clark »

The 1300 half shafts...hmmm maybe keep em, but I'd bin them too
NEVER throw half-shafts away. My stock is depleting fast, due to hubs that will not come off. My next pair are going to have 60 tonnes on them on Monday and if that doesn't shift the hubs I'm screwed. Soon all scrap bins outside engineering shops in Warwickshire will have at least one of my knackered half-shafts in.
Vindicator Sprint, Honda Fireblade RRX 919cc, re-powered by AB Performance. Quick.
Post Reply