The Triumph Dolomite Club - Discussion Forum

The Number One Club for owners of Triumph's range of small saloons from the 1960s and 1970s.
It is currently Sun Jul 21, 2024 11:04 am

All times are UTC+01:00




Post new topic  Reply to topic  [ 260 posts ]  Go to page Previous 114 15 16 17 18 Next
Author Message
PostPosted: Sat Nov 18, 2023 9:04 am 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Got the bottom of the A pillar and top of the cill finished off. Put the doors back on so I'm able to align the outer cill correctly. Doors still need aligning properly and out cill still needs a few adjustments before welding in place.


Attachments:
20231117_130941.jpg
20231117_130941.jpg [ 112.28 KiB | Viewed 108277 times ]
20231117_130842.jpg
20231117_130842.jpg [ 115.65 KiB | Viewed 108277 times ]
20231117_130827.jpg
20231117_130827.jpg [ 95.31 KiB | Viewed 108277 times ]
20231117_125901.jpg
20231117_125901.jpg [ 118.64 KiB | Viewed 108277 times ]
20231117_124547.jpg
20231117_124547.jpg [ 127.73 KiB | Viewed 108277 times ]
20231117_121707.jpg
20231117_121707.jpg [ 108.88 KiB | Viewed 108277 times ]
20231117_114627.jpg
20231117_114627.jpg [ 111.13 KiB | Viewed 108277 times ]
20231117_110629.jpg
20231117_110629.jpg [ 75.91 KiB | Viewed 108277 times ]
20231117_110129.jpg
20231117_110129.jpg [ 79.23 KiB | Viewed 108277 times ]
Top
   
PostPosted: Sat Nov 18, 2023 10:55 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1734
Location: Harrow Middlesex
Nice work


Top
   
PostPosted: Tue Nov 21, 2023 5:38 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Got the outer cill lined up correctly. Put some tacks along the top edge to hold it in place. Folded over the bottom lip around the inner cill ready for welding. Removed both doors and welded along the top which just needs cleaning up.


Attachments:
20231121_121230.jpg
20231121_121230.jpg [ 74.85 KiB | Viewed 108226 times ]
20231121_121258.jpg
20231121_121258.jpg [ 47.75 KiB | Viewed 108226 times ]
20231121_121346.jpg
20231121_121346.jpg [ 62.85 KiB | Viewed 108226 times ]
20231121_121410.jpg
20231121_121410.jpg [ 63.33 KiB | Viewed 108226 times ]
20231121_121423.jpg
20231121_121423.jpg [ 47.21 KiB | Viewed 108226 times ]
20231121_123356.jpg
20231121_123356.jpg [ 125.55 KiB | Viewed 108226 times ]
20231121_132630.jpg
20231121_132630.jpg [ 125.91 KiB | Viewed 108226 times ]
20231121_133524.jpg
20231121_133524.jpg [ 117.55 KiB | Viewed 108226 times ]
Top
   
PostPosted: Thu Dec 21, 2023 7:54 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Got the bottom of the cill welded and tided up. Tided up the weld along the top aswell. Just need to cap off both ends to complete this side. Then on to the next bit to do!


Attachments:
20231221_142558.jpg
20231221_142558.jpg [ 118.96 KiB | Viewed 106217 times ]
20231221_151014.jpg
20231221_151014.jpg [ 116.43 KiB | Viewed 106217 times ]
20231221_152053.jpg
20231221_152053.jpg [ 89.97 KiB | Viewed 106217 times ]
20231221_152108.jpg
20231221_152108.jpg [ 87.48 KiB | Viewed 106217 times ]
20231221_152127.jpg
20231221_152127.jpg [ 121.07 KiB | Viewed 106217 times ]
20231221_153353.jpg
20231221_153353.jpg [ 121.2 KiB | Viewed 106217 times ]
Top
   
PostPosted: Sat Dec 23, 2023 8:04 am 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Today my plan was to finish the cill. Got rear end of cill finished off and whilst finishing the front off I ran out of mig wire so decided to start preparing the next part. Got the rear lower wing cut out and found an old wheel arch repair which looks like I was held together with fillet as it just came apart from the original wing panel. Now I will have to clean up the rest of the old repair to see if it's structuly sound before fitting the wing repair panel.


Attachments:
20231222_112150.jpg
20231222_112150.jpg [ 66.08 KiB | Viewed 105753 times ]
20231222_115858.jpg
20231222_115858.jpg [ 117.38 KiB | Viewed 105753 times ]
20231222_123247.jpg
20231222_123247.jpg [ 110.42 KiB | Viewed 105753 times ]
20231222_125053.jpg
20231222_125053.jpg [ 121.66 KiB | Viewed 105753 times ]
20231222_125222.jpg
20231222_125222.jpg [ 119.64 KiB | Viewed 105753 times ]
20231222_131805.jpg
20231222_131805.jpg [ 101.48 KiB | Viewed 105753 times ]
20231222_131821.jpg
20231222_131821.jpg [ 76.58 KiB | Viewed 105753 times ]
20231222_131901.jpg
20231222_131901.jpg [ 132.65 KiB | Viewed 105753 times ]
20231222_131921.jpg
20231222_131921.jpg [ 120.83 KiB | Viewed 105753 times ]
Top
   
PostPosted: Sat Dec 23, 2023 8:05 am 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Inside the boot and cill end repair finished


Attachments:
20231222_132429.jpg
20231222_132429.jpg [ 112.93 KiB | Viewed 105751 times ]
20231222_132536.jpg
20231222_132536.jpg [ 128.39 KiB | Viewed 105751 times ]
Top
   
PostPosted: Sat Dec 30, 2023 4:01 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
So after a couple of hours work the passanger side cill finished off! All welded, seam sealer then primered and top coat just to seal the primer. Will just need a skim of filler in places to finish off properly. A bit of an improvement from when I started!


Attachments:
20231230_135253.jpg
20231230_135253.jpg [ 99.55 KiB | Viewed 103859 times ]
20231230_141322.jpg
20231230_141322.jpg [ 126.05 KiB | Viewed 103859 times ]
20231230_141342.jpg
20231230_141342.jpg [ 112.18 KiB | Viewed 103859 times ]
20231230_144319.jpg
20231230_144319.jpg [ 123.59 KiB | Viewed 103859 times ]
20231230_144331.jpg
20231230_144331.jpg [ 118.17 KiB | Viewed 103859 times ]
20231230_144347.jpg
20231230_144347.jpg [ 136.52 KiB | Viewed 103859 times ]
20231230_144412.jpg
20231230_144412.jpg [ 132.18 KiB | Viewed 103859 times ]
Top
   
PostPosted: Sun Dec 31, 2023 4:13 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Tackled the bad wheel arch repair. Easiest way was to cut it out and start again. Found another bad repair on the inner wheel arch aswell. Wheel arch is clamped and ready to weld back on properly.


Attachments:
20231231_110905.jpg
20231231_110905.jpg [ 109.16 KiB | Viewed 103665 times ]
20231231_111049.jpg
20231231_111049.jpg [ 125.55 KiB | Viewed 103665 times ]
20231231_112046.jpg
20231231_112046.jpg [ 109.91 KiB | Viewed 103665 times ]
20231231_114016.jpg
20231231_114016.jpg [ 106.85 KiB | Viewed 103665 times ]
20231231_121247.jpg
20231231_121247.jpg [ 110.66 KiB | Viewed 103665 times ]
20231231_123135.jpg
20231231_123135.jpg [ 104.86 KiB | Viewed 103665 times ]
20231231_135527.jpg
20231231_135527.jpg [ 83.83 KiB | Viewed 103665 times ]
20231231_142729.jpg
20231231_142729.jpg [ 80.85 KiB | Viewed 103665 times ]
Top
   
PostPosted: Sun Dec 31, 2023 6:45 pm 
Offline
TDC Member

Joined: Mon Dec 12, 2016 9:53 pm
Posts: 1734
Location: Harrow Middlesex
Nice repair on the inner arch, i got a bit carried away and cut a bit to much of my inner arch away :oops: :oops: its a real pain tiring to make a repair panel for it now, but need the inner arch done before i fit the outer arch

Dave


Top
   
PostPosted: Sun Dec 31, 2023 8:41 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Quote:
Nice repair on the inner arch, i got a bit carried away and cut a bit to much of my inner arch away :oops: :oops: its a real pain tiring to make a repair panel for it now, but need the inner arch done before i fit the outer arch

Dave
Just need to repair the lower part before putting the lower wing repair panel on.


Top
   
PostPosted: Sat Jan 20, 2024 2:41 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Today I moved into my permanent storage space. Not as spacious as a barn but still plenty of room. Built some temporary racking until I decide how I'm going to make it permanent and fit a bench aswell. Just need to sort out ventilation so the container doesn't sweat and some lighting. Also acquired a roll over frame! Just need to make it fit the dolomite shell.


Attachments:
20240120_130618.jpg
20240120_130618.jpg [ 157.95 KiB | Viewed 85593 times ]
20240120_125932.jpg
20240120_125932.jpg [ 93.87 KiB | Viewed 85593 times ]
20240120_130514.jpg
20240120_130514.jpg [ 95.33 KiB | Viewed 85593 times ]
20240120_130506.jpg
20240120_130506.jpg [ 79.15 KiB | Viewed 85593 times ]
20240120_125932.jpg
20240120_125932.jpg [ 93.87 KiB | Viewed 85593 times ]
20240120_134438.jpg
20240120_134438.jpg [ 50.74 KiB | Viewed 85593 times ]
Top
   
PostPosted: Sun Feb 04, 2024 3:58 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Got the wheel arch repair back on today. Should only need a little skim of filler to tidy up. Has anyone got any pics of the brackets for the roll over jig so I have an idea of where to start. Bolted it to the rear bumper mounts but rear panel started flexing so gave up trying to get it on the spit.


Attachments:
20240204_142812.jpg
20240204_142812.jpg [ 110.77 KiB | Viewed 75030 times ]
20240204_144454.jpg
20240204_144454.jpg [ 118.3 KiB | Viewed 75030 times ]
20240204_150540.jpg
20240204_150540.jpg [ 120.33 KiB | Viewed 75030 times ]
20240204_151515.jpg
20240204_151515.jpg [ 92.39 KiB | Viewed 75030 times ]
Top
   
PostPosted: Sat Feb 24, 2024 7:14 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
Passanger side boot floor repair in and bottom of side panel replaced. Need to cut out bottom of inner wheel arch and replace now floor is solid. Started to fit rear quarter panel. It's too long at the back and wrong shape to fit rear panel of the car. Going to need a bit of adjustment to make it fit properly.


Attachments:
20240224_141913.jpg
20240224_141913.jpg [ 76.69 KiB | Viewed 63755 times ]
20240224_145030.jpg
20240224_145030.jpg [ 55.5 KiB | Viewed 63755 times ]
20240224_153315.jpg
20240224_153315.jpg [ 67.97 KiB | Viewed 63755 times ]
20240224_155402.jpg
20240224_155402.jpg [ 71.7 KiB | Viewed 63755 times ]
20240224_163423.jpg
20240224_163423.jpg [ 68.6 KiB | Viewed 63755 times ]
20240224_163436.jpg
20240224_163436.jpg [ 68.47 KiB | Viewed 63755 times ]
20240224_163508.jpg
20240224_163508.jpg [ 95.71 KiB | Viewed 63755 times ]
20240224_163554.jpg
20240224_163554.jpg [ 93.55 KiB | Viewed 63755 times ]
Top
   
PostPosted: Sat Feb 24, 2024 7:16 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
More pics


Attachments:
20240224_121606.jpg
20240224_121606.jpg [ 85.47 KiB | Viewed 63754 times ]
20240224_125036.jpg
20240224_125036.jpg [ 115.35 KiB | Viewed 63754 times ]
20240224_131255.jpg
20240224_131255.jpg [ 79.13 KiB | Viewed 63754 times ]
20240224_134015.jpg
20240224_134015.jpg [ 79.74 KiB | Viewed 63754 times ]
20240224_134416.jpg
20240224_134416.jpg [ 68.59 KiB | Viewed 63754 times ]
Top
   
PostPosted: Sat Mar 23, 2024 7:52 pm 
Offline
TDC Member

Joined: Sat Aug 05, 2023 6:17 pm
Posts: 36
The rear quarter panel is done. Had to move the bumper mounting hole and trim the ends to get it to fit.


Attachments:
20240323_122514.jpg
20240323_122514.jpg [ 98.76 KiB | Viewed 29495 times ]
20240323_122530.jpg
20240323_122530.jpg [ 107.7 KiB | Viewed 29495 times ]
20240323_130615.jpg
20240323_130615.jpg [ 92.08 KiB | Viewed 29495 times ]
20240323_130635.jpg
20240323_130635.jpg [ 89.1 KiB | Viewed 29495 times ]
20240323_135506.jpg
20240323_135506.jpg [ 91.78 KiB | Viewed 29495 times ]
20240323_135517.jpg
20240323_135517.jpg [ 106.93 KiB | Viewed 29495 times ]
20240323_145921.jpg
20240323_145921.jpg [ 90.29 KiB | Viewed 29495 times ]
20240323_145934.jpg
20240323_145934.jpg [ 100.49 KiB | Viewed 29495 times ]
20240323_161916.jpg
20240323_161916.jpg [ 78.47 KiB | Viewed 29495 times ]
Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 260 posts ]  Go to page Previous 114 15 16 17 18 Next

All times are UTC+01:00


Who is online

Users browsing this forum: Bing and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited