The Triumph Dolomite Club - Discussion Forum

Hi all,
Please can you explain how the rear tailpipe is put into place
I know I have to remove the l/ h rear wheel , but is there anything else that needs removing ?

Many thanks for your help

It should go in but the body needs jacking from the body not the axle, and the pipe fed in from the wheel arch. A bit fiddley but doable. Good luck

Tony

Do I need to undo the tie bar or the suspension ?

Thanks

Hi Mike,
Many thanks for the info on fitting the rear silencer

I'll be Uri Gellor by the time it's fitted

Kind regards
Simon

I dropped my angled tie bar and the radius arm. The trick to save this would be to do it on a 4 post lift, then you can get the pipe down enough and corkscrew it in.

You do get the knack after practice...

Jonners

Does this help?

Many thanks James

I have that book somewhere

Regards Simon

The parts catalogues & factory workshop manuals are available for download from my BT Cloud.

"Carefully manoeuovre the tailpipe assembly through the wheel arch" - sums it up!