moulded / angled hoses

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
slant4

moulded / angled hoses

#1 Post by slant4 »

Anyone know a source for moulded fuel and breather hose suitable for carb breathers, etc. The application is a SD1 with Strombergs and not even robber bors have anything!
Top
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13589
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

#2 Post by xvivalve »

Malc, our erstwhile spares secretary...
Top
slant4

doubt it

#3 Post by slant4 »

That maybe an option, but never fitted to any triumph product except the stag!
Top
User avatar
xvivalve
TDC West Mids Area Organiser
Posts: 13589
Joined: Thu Sep 28, 2006 1:13 pm
Location: Over here...can't you see me?

#4 Post by xvivalve »

I was highlighting he has a hose contact who has remanufactured some of our hoses and may be able to help you through them...
Top
Jon Tilson
Guest contributor
Guest contributor
Posts: 11179
Joined: Tue Oct 03, 2006 9:45 pm
Location: Middlesex

How different?

#5 Post by Jon Tilson »

How different are these from the breather hos/balance pipes on a dolly 1850/tr7/sprint? These have a big bend into a flared end at the pipe and a very small bore (1/4inch or so) at the carb.
Moss do them

Jonners
Note from Admin: sadly Jon passed away in February 2018 but his humour and wealth of knowledge will be fondly remembered by all. RIP Jonners.
Top
Post Reply

Return to “Dolomite-related [Start here!]”