Page 1 of 1

Drivers door lock issue

Posted: Sun Jun 07, 2020 3:35 pm
by mahony
My drivers side door lock will not stay locked , after i lock the door with the key i can still open it via the outside door handle, ( black pin moves down still ) any ideas before i remove the door card and take a look ? .

Re: Drivers door lock issue

Posted: Sun Jun 07, 2020 3:50 pm
by cleverusername
Image

From the dolomite parts catalogue.

Re: Drivers door lock issue

Posted: Sun Jun 07, 2020 8:49 pm
by new to this
I would gess one of the clips that hold the rods in place has broke

Dave

Re: Drivers door lock issue

Posted: Mon Jun 08, 2020 10:45 am
by mahony
Door card off and nothing broken and all clips in place, Wd40 next to see if that helps 🤔

Re: Drivers door lock issue

Posted: Mon Jun 08, 2020 11:02 am
by cleverusername
mahony wrote: Mon Jun 08, 2020 10:45 am Door card off and nothing broken and all clips in place, Wd40 next to see if that helps 🤔
Be careful with WD-40, it isn't really designed as lubricant, it is as the name suggests a water displacer and cleaner. The fact it lubricates is more of a side effect.

So it will work sort term but it won't persist and you will be back to square one. I know from locks they generally use a dry lubricant, something like graphite, to stop crud building up.

Re: Drivers door lock issue

Posted: Mon Jun 08, 2020 11:21 am
by mahony
Gonna clean with Wd40 and then find a suitable lubricant
if the Wd40 works 😀

Re: Drivers door lock issue

Posted: Mon Jun 08, 2020 12:08 pm
by xvivalve
What needs lubrication is the area around the two overlapping plates with a crescent shaped hole...

Re: Drivers door lock issue

Posted: Mon Jun 08, 2020 2:17 pm
by mahony
Lubricated ( including overlapping plates ) and still no good, swapped for another lock and all good 😀😀 , thanks for all your replies 👍