Page 1 of 1
Rev counter light bulb holder source
Posted: Sun Sep 13, 2020 4:30 pm
by GrahamFountain
Does anybody know of a source for the bulb holders that push in the back of the rev counter and speedo. That or something that fits in the hole well enough - it's for a an 1850 counter to fit in the Herald and modded to match the speedo - with a pointer arm off an old Herald speedo. So it's going to need leads making up anyway.
Graham
Re: Rev counter light bulb holder source
Posted: Mon Sep 14, 2020 4:41 pm
by Flyfisherman
Re: Rev counter light bulb holder source
Posted: Mon Sep 14, 2020 10:12 pm
by GrahamFountain
I'll have to check the hole is 5/8ths, but it looks like the one. Thanks
Graham
Re: Rev counter light bulb holder source
Posted: Mon Sep 14, 2020 10:49 pm
by 2door-toledo
Yes, Autosparks definitely supply them - I had an entirely new loom including new bulb holders made for my Toledo.
Re: Rev counter light bulb holder source
Posted: Wed Sep 23, 2020 1:05 am
by Carledo
I can dig you out a pre-owned one, with a length of the correct colour wire if you so desire.
Steve
Re: Rev counter light bulb holder source
Posted: Fri Sep 25, 2020 9:05 am
by GrahamFountain
Carledo wrote: ↑Wed Sep 23, 2020 1:05 am
I can dig you out a pre-owned one, with a length of the correct colour wire if you so desire.
Steve
Thanks for that Steve. I've yet to check, but I realized I should have a spare in the garage, and I'm a ways away from fitting the tacho in the Herald - means swapping in a Vitesse dash I have re-varnished. So I'll get back to you.
Graham