It’s the bracket which holds the Sprint load sensing valve onto the body. £16 inc postage.
Good news…
-
xvivalve
- TDC West Mids Area Organiser
- Posts: 13580
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Good news…
…I’ve had a small quantity of these made:
It’s the bracket which holds the Sprint load sensing valve onto the body. £16 inc postage.
It’s the bracket which holds the Sprint load sensing valve onto the body. £16 inc postage.
-
Carledo
- TDC Shropshire Area Organiser
- Posts: 7247
- Joined: Sun Aug 21, 2011 5:12 pm
- Location: Highley, Shropshire
Re: Good news…
Very nice and a good idea for all those reshelled cars where the guy doing it forgot to salvage it from the original shell! I've been asked for one more than once, but not lately.
One small niggle, isn't there supposed to be a small (roughly 5/32") hole in the middle for the rivet that secures it to the floor inside? Or is it perhaps deliberate, because the position of said hole is not fixed?
Steve
One small niggle, isn't there supposed to be a small (roughly 5/32") hole in the middle for the rivet that secures it to the floor inside? Or is it perhaps deliberate, because the position of said hole is not fixed?
Steve
'73 2 door Toledo with Vauxhall Carlton 2.0 8v engine (The Carledo)
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!
Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.
'78 Sprint Auto with Vauxhall Omega 2.2 16v engine (The Dolomega)
'72 Triumph 1500FWD in Slate Grey, Now with RWD and Carledo powertrain!
Maverick Triumph, Servicing, Repairs, Electrical, Recomissioning, MOT prep, Trackerjack brake fitting service.
Apprentice served Triumph Specialist for 50 years. PM for more info or quotes.