1300 Inlet manifold vacuum spigot loose

For everything to do with Dolomites, Toledos, FWD cars and Dolomite-based kitcars.
Post Reply
Message
Author
wgcjim20
TDC Member
Posts: 16
Joined: Fri Sep 08, 2023 12:23 pm

1300 Inlet manifold vacuum spigot loose

#1 Post by wgcjim20 »

Hi all!

I've recently acquired a Dolly 1300 and noticed that the metal vacuum take off pipe for the servo is very loose where it connects to the inlet manifold. What should hold it in place so that It's air tight?

TIA
Jim
Top
Post Reply

Return to “Dolomite-related [Start here!]”