Extractors on a Sprint???

Locked
Message
Author
milesinfront
Posts: 11
Joined: Fri Sep 30, 2005 12:56 am

Extractors on a Sprint???

#1 Post by milesinfront » Sat Oct 01, 2005 10:36 pm

Has anyone ever susessfully done this, and actually made an increase in HP???

<p></p><i></i>

Carsreunited
Posts: 1673
Joined: Sun Aug 17, 2003 6:45 pm

Re: Extractors on a Sprint???

#2 Post by Carsreunited » Sat Oct 01, 2005 10:56 pm

Do you mean a custom exhaust manifold? I'm not very good on the technical stuff.<br>
<br>
<br>
<br>


<p></p><i></i>

milesinfront
Posts: 11
Joined: Fri Sep 30, 2005 12:56 am

Re: Extractors on a Sprint???

#3 Post by milesinfront » Sat Oct 01, 2005 11:00 pm

That's right! Americans seems to call them headers...<br>
<br>
Anything that has some scavenging effect...

<p></p><i></i>

Carsreunited
Posts: 1673
Joined: Sun Aug 17, 2003 6:45 pm

Re: Extractors on a Sprint???

#4 Post by Carsreunited » Sat Oct 01, 2005 11:32 pm

That's a long term objective of mine. There have been a few posts on the subject so I'll try and find an old thread with the details. It's not an easy proposition. (finding the thread and a custom manifold!)<br>
<br>
Scott

<p></p><i></i>

milesinfront
Posts: 11
Joined: Fri Sep 30, 2005 12:56 am

Re: Extractors on a Sprint???

#5 Post by milesinfront » Sun Oct 02, 2005 12:07 am

I've done a few scetches etc...<br>
<br>
My idea is to bend the system upwards, not down, as there's no room for a beneficial design. I'm working on a 4-1 design with the collector finally pointing downwards at the back of the motor. My race car doesn't have the heater motor there anymore, so I have a bit more room than usual...<br>
<br>
Another idea was to have 8 small pipes, the same diameter as the eight ports exiting the head. This would be really cool, and if done right would have the potential of acutally doing a better job than 4 1&3/4' pipes....<br>
<br>
Imagine the comments.....<!--EZCODE EMOTICON START ;) --><img src=http://www.ezboard.com/intl/aenglish/im ... s/wink.gif ALT=";)"><!--EZCODE EMOTICON END-->

<p></p><i></i>

tryitnsee
Posts: 16
Joined: Fri Sep 30, 2005 10:36 am

Re: Extractors on a Sprint???

#6 Post by tryitnsee » Mon Oct 03, 2005 12:09 pm

There is a racing team in the Young Timers trophy over in Germany that have done it - but they moved the motor in a major way. I'll try and track down the details - I had a photo of the engine bay but the old laptop was stolen. <br>
<br>
Series is on http://www.youngtimer.de - I'll go searching for 'em.<br>
<br>
<br>
John

<p></p><i></i>

KLJ895W
Posts: 265
Joined: Mon Sep 22, 2003 9:30 pm

Re: Extractors on a Sprint???

#7 Post by KLJ895W » Mon Oct 03, 2005 4:20 pm

<!--EZCODE LINK START--><a href="http://www.sprint-racing.de/">www.sprin ... <!--EZCODE LINK END-->

<p>1980 Sprint<br>
1980 1850HL with Sprint gearbox, propshaft and axle<br>
1972 VW Camper Van</p><i></i>

legalalien
Posts: 2
Joined: Tue Oct 11, 2005 3:21 pm

He's leading his group

#8 Post by legalalien » Tue Oct 11, 2005 3:21 pm

<br>
<br>
<!--EZCODE AUTOLINK START--><a href="http://www.spezial-tourenwagen-trophy.d ... <!--EZCODE AUTOLINK END--><br>
<br>
contains some photo's of the Dolly in action<br>
<br>
<br>
<br>


<p></p><i></i>

Locked

Who is online

Users browsing this forum: No registered users and 1 guest