Strut Brace

Locked
Message
Author
scotsprint
Posts: 8
Joined: Mon Jul 07, 2003 11:27 am

Strut Brace

#1 Post by scotsprint » Sat Apr 22, 2006 7:18 pm

Recent thread asks if there is an off the shelf strut brace for a Sprint. Does a Sprint need a strut brace?<br>
In modern cars with Macpherson struts the top of the strut tower takes the reaction from the spring and is also a suspension pick up point. When the bodywork flexes under load the strut towers move, usually upwards and inwards, thereby altering the suspension geometry. A brace stops the inward movement, or at least lessens it.<br>
The suspension on the Sprint is located entirely on the subframe and the spring towers take only the spring reactions so even if the bodywork flexes under load the suspension geometry should remain unchanged. Or maybe I have got it all wrong!<br>
Has anyone out there fitted a brace and if so has it made a difference?

<p></p><i></i>

MaddMart
Posts: 1154
Joined: Tue Apr 15, 2003 8:35 pm

Re: Strut Brace

#2 Post by MaddMart » Sat Apr 22, 2006 7:27 pm

Good question, as I'm in the middle of making a brace myself. I was speaking to Jon (of Sierra brake conversion fame) about his home made brace, today at Castle Combe. He said he wasn't sure if it made any difference though.

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

Carsreunited
Posts: 1673
Joined: Sun Aug 17, 2003 6:45 pm

Re: Strut Brace

#3 Post by Carsreunited » Sat Apr 22, 2006 7:41 pm

I've seen some on the other racers. Whether it makes any difference??! Wouldn't hurt I suppose.<br>
<br>


<p></p><i></i>

MaddMart
Posts: 1154
Joined: Tue Apr 15, 2003 8:35 pm

Re: Strut Brace

#4 Post by MaddMart » Sat Apr 22, 2006 7:57 pm

The Moosehunter Sprint had one on. Perhaps he'll enlighten us!

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

tinweevil
Posts: 573
Joined: Thu Jan 15, 2004 3:05 pm

Re: Strut Brace

#5 Post by tinweevil » Sun Apr 23, 2006 1:18 pm

It could hurt, if it does nowt it's just ballast! Build a telltale would be the only way to be sure.<br>
<br>
Tinweevil<br>


<p>1978 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/704">Dolomite Sprint</a><!--EZCODE LINK END--><br>
1972 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/754">Spitfire IV</a><!--EZCODE LINK END--><br>
1968 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/705">GT6 II</a><!--EZCODE LINK END--><br>
1973 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/755">Dolomite Sprint</a><!--EZCODE LINK END--><br>
1980 <!--EZCODE LINK START--><a href="http://www.triumphowners.com/864">Dolomite 1500HL</a><!--EZCODE LINK END--><br>
39 anorak points on the Nicholas scale<br>
</p><i></i>

SMIFTER
Posts: 846
Joined: Wed Feb 12, 2003 3:04 pm

Re: Strut Brace

#6 Post by SMIFTER » Wed Apr 26, 2006 12:49 am

Mart - Next time you are on track you can borrow my Ally Strut brace if you like. I'd like to know if it does anything. The PO reckoned it made a significant difference.<br>
<br>
G

<p></p><i></i>

MaddMart
Posts: 1154
Joined: Tue Apr 15, 2003 8:35 pm

Re: Strut Brace

#7 Post by MaddMart » Wed Apr 26, 2006 8:08 am

Yea, I'll give it a go. I've put finishing mine on hold, unless someone can definately say that it does make a difference. I had assumed (rightly or wrongly) that it would make a difference.

<p>Martin<br>
<br>
<!--EZCODE LINK START--><a href="http://www.dolomitesprint.com/" target="top">www.dolomitesprint.com</a><!--EZCODE LINK END--></p><i></i>

Locked

Who is online

Users browsing this forum: No registered users and 2 guests