The Triumph Dolomite Club - Discussion Forum

new to this

Mark

What other mods have you done ?

Dave

new to this

My car is a 74 M reg it was Ziebart but still rusty, as I've replaced the rear sill steps both sides , and bottom of door pillars, i drilled holes to put rubber grommets in its a good way of getting wax oil in

Dave

new to this

Mark My slave cylinder came from a Mondeo, it lines up with the clutch plate okay, when it wears out ill use a Vauxhall omega next time, only reason is one of the threads on the Mondeo slave is an odd size, and i had to make up a hose just to take that thread, i didn't want to modify the slave ever...

new to this

Thats not the car on E Bay is it ?

Dave

new to this

This is my setup there’s a lot of adjustment if needed https://i.postimg.cc/V5hLm2wM/IMG-1477.jpg https://i.postimg.cc/nMrh8pyp/IMG-1479.jpg https://i.postimg.cc/n9XFqG4C/IMG-1480.jpg https://i.postimg.cc/dhPsTdLV/IMG-1562.jpg https://i.postimg.cc/hf74jM4Y/IMG-1563.jpg https://i.postimg.cc/QFQXgtTk/...

new to this

Try these
http://www.bearing-king.co.uk/bearing/3 ... 7-r23/4780
http://simplybearings.co.uk/shop/p70073 ... _info.html

I got these from stag forum 1st time ive ever done links

Dave

new to this

Ive got a bit of wear on my Sprint rear Crankshaft, so bought a Double lip seal, not fitted yet, its the same size as a Stag seal,

Dave

new to this

Ive had all 4 of my door hinges rebuilt, i took mine to an engineer, he removed the pins and drilled the hinges to take over sized pins that he made, while they were apart i got him to drill a hole in the side of the hinge so they can be oiled

Dave

new to this

Ive ended up veneering my dash 3 times :evil: the first 2 times i used bur elm, its a nice veneer but i had trouble with it, i bought my veneer from EBay so not sure about quality, the glue i used was Gorilla Glue which is white in colour, every thing went okay so i thought, stuck the veneer down, ...

new to this

shaunroche wrote: ↑Sun Aug 11, 2024 5:41 pm Chapman and Cliff re-veneered dash now refitted!

What veneer is that ? are the door top capping's the same ?

Dave

new to this

If you dont want a Sprint splitter, you could try mk 1 golf rabbit, ive fitted one to my Stag

new to this

Hi are you running the standard fuel tank ? quote=SprintV8 post_id=350097 time=1723110959 user_id=86] I believe he’s running a Dolomite tank from memory with external pump. Dare say he be along soon to confirm or correct me. Semi correct, I am running the original tank but with an internally mounte...

new to this

Thanks for all your help i have been having trouble logging in as well

Dave

new to this

Hi are you running the standard fuel tank ?

new to this

Ah didn't appreciate the ARP set replaced the bolts as well. In that case if the studs can take the strain so to speak then all it should do is squash the gasket a bit more, though I would be a little concerned about distortion of the block face around the top of the threads. It does happen with &q...

The Triumph Dolomite Club - Discussion Forum

Search found 1628 matches

Re: Sprint Concentric Slave

Re: Ziebart Treatment, a poll.

Re: Sprint Concentric Slave

Re: Dolomite Sprint Found!

Re: Sprint Concentric Slave

Re: Rear crankshaft seal

Re: Rear crankshaft seal

Re: Door Hinges and Door seals

Re: VA138, the next chapter....

Re: VA138, the next chapter....

Re: 1500TC - Front Splitter options

Re: Jag V6 swapped Dolomite

Re: password

Re: Jag V6 swapped Dolomite

Re: Cylinder head studs