Off Topic
Re: Off Topic
Chances of getting home on Thursday? Not good, not good at all. Christmas in Qatar =
1978 Pageant Sprint - the rustomite, 1972 Spitfire IV - sprintfire project, 1968 Valencia GT6 II - little Blue, 1980 Vermillion 1500HL - resting. 1974 Sienna 1500TC, Mrs Weevils big brown.
-
MIG Wielder
- TDC Member
- Posts: 2338
- Joined: Sun Mar 16, 2008 2:52 pm
Re: Off Topic
I walked into the office at the same time as the boss yesterday " Does that car of yours have a heater, Tony ? " he asked. 
And this is one of the Captains of Industry !
Tony.
And this is one of the Captains of Industry !
Tony.
-
JPB
Re: Off Topic
Thaw. No, wait, freeze again. No, thaw, oh, sorry; freezing again.
I've trained some icicles down the front of my house by dropping threads from the gutter and pinning the other ends of them to the ground below.
I've trained some icicles down the front of my house by dropping threads from the gutter and pinning the other ends of them to the ground below.
-
TLC
- Guest contributor
- Posts: 643
- Joined: Wed Oct 04, 2006 4:40 pm
- Location: Somewhere in the middleshire
Re: Off Topic
Stan Part wrote:LAst day at work before the holidays!!
TRIUMPHANT 
-
JPB
Re: Off Topic
Awwww rats! I broke my lawnmower. Don't suppose it was intended to be fitted with a studded roller and used as a snow blower though eh?
-
covcourier
- TDC Member
- Posts: 527
- Joined: Wed Nov 25, 2009 9:55 pm
- Location: Coventry and beyond.........
Re: Off Topic
Just confirmed that we are moving house on the 7th Jan.
Driving down to Spain on Monday for a week so best get boxing everything up.
Do you think Santa would lend me a couple Elves for a few days?
Driving down to Spain on Monday for a week so best get boxing everything up.
Do you think Santa would lend me a couple Elves for a few days?
***I'd rather ask for forgiveness after than seek permission before!!***
-
baz
Re: Off Topic
I'd be happy to swap some of your snow for some of our heat !!! 39.9 Celsius yesterday!! I have lived here for 35 years and still have not gotten used to the heat!
-
Mad Mart
- TDC Member
- Posts: 8532
- Joined: Tue Oct 03, 2006 5:48 pm
- Location: Winscombe, North Somerset, England
- Contact:
Re: Off Topic
I'm getting withdrawal symptons. I need to get on with my next resto. 
Sprintless for the first time in 35+ years. 
... Still Sprintless.
Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
2012 Porsche Boxster 981 S
... Still Sprintless.Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
2012 Porsche Boxster 981 S
-
Spunkymonkey
Re: Off Topic
Next plan for the red Daf's stuck piston - one cheap grease gun, one old spark plug to make an adapter from and a bottle of gear oil 
Re: Off Topic
Where do all the 7/16 spanners go?
1978 Pageant Sprint - the rustomite, 1972 Spitfire IV - sprintfire project, 1968 Valencia GT6 II - little Blue, 1980 Vermillion 1500HL - resting. 1974 Sienna 1500TC, Mrs Weevils big brown.
-
Pauldaf44
Re: Off Topic
Really now was there really a need to double park me then spend 3 hours buying your groceries Audi A4 driver. Audi living up to its meaning there Arseholes usually drive it!!
-
1300dolly
Re: Off Topic
Wibble wibble, blah, blah what a load of smelly male cow manure.
p.s happy new year .
p.s happy new year .
-
Spunkymonkey
Re: Off Topic
Let the pictures do the talking:
So much for £4.50 Amtek grease guns
Next plan is to work out a better pump or may just connect up my pressure washer and use water. 1400 psi acting on an 8.8 square inch piston = about 5.5tonnes pressure by my reckoning which should move something! Not entirely sure the head studs (or their threads in the alloy casing) would stand it though............
So much for £4.50 Amtek grease guns
Next plan is to work out a better pump or may just connect up my pressure washer and use water. 1400 psi acting on an 8.8 square inch piston = about 5.5tonnes pressure by my reckoning which should move something! Not entirely sure the head studs (or their threads in the alloy casing) would stand it though............