Wiring loom
-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Wiring loom
I've got a couple of wiring questions
1/ what colour are the wires that feed the horn
2/ how are the wires run that feed the starter motor,do they run along the anti role bar
Thanks Dave
1/ what colour are the wires that feed the horn
2/ how are the wires run that feed the starter motor,do they run along the anti role bar
Thanks Dave
- Mad Mart
- TDC Member
- Posts: 8532
- Joined: Tue Oct 03, 2006 5:48 pm
- Location: Winscombe, North Somerset, England
- Contact:
Re: Wiring loom
On a Sprint, purple & black wires to the horn +ve, black earth.
The wires for the starter are run inside the front rail of the subframe. There should be two holes in the subframe for plastic clips.
The wires for the starter are run inside the front rail of the subframe. There should be two holes in the subframe for plastic clips.
Sprintless for the first time in 35+ years.
... Still Sprintless.
Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
2012 Porsche Boxster 981 S


Engines, Gearboxes, Overdrives etc. rebuilt. PM me.
2012 Porsche Boxster 981 S

-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: Wiring loom
thanks Mart
Found horn wide today,didn't see holes for the clips for starter motor
Thanks Dave
Found horn wide today,didn't see holes for the clips for starter motor
Thanks Dave
-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: Wiring loom
Got another question,where does the live feed block mount,and can you get inside it to replace a cable ?
Thanks Dave
Thanks Dave
-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: Wiring loom
does the live block/feed open up,if so how and where is it mounted to the car
Thanks Dave
Thanks Dave
- Flyfisherman
- Guest contributor
- Posts: 980
- Joined: Sat Sep 04, 2010 10:42 am
Re: Wiring loom
new to this wrote: ↑Fri Jun 08, 2018 7:27 pm thanks Mart
Found horn wide today,didn't see holes for the clips for starter motor
Thanks Dave
The holes are the back side of the front cross member on the subframe
Re: Wiring loom
It is attached to the starter cable around the alternator. It can open up but the wires have spade connectors so no need.new to this wrote: does the live block/feed open up,if so how and where is it mounted to the car
Thanks Dave
Jeroen
Classic Kabelboom Company. For all your wiring needs. http://www.classickabelboomcompany.com
-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: Wiring loom
thanks I'll have a other lookFlyfisherman wrote: ↑Sun Jun 10, 2018 8:48 pmnew to this wrote: ↑Fri Jun 08, 2018 7:27 pm thanks Mart
Found horn wide today,didn't see holes for the clips for starter motor
Thanks Dave
The holes are the back side of the front cross member on the subframe
Dave
-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: Wiring loom
Jeroen
I think the battery cable is short, that's why I wanted to get inside the feed block,where is the feed block mounted
Thanks Dave
Re: Wiring loom
The feedblock is crimped to the startercable. When you have no starter cable you don't have a feedblock either.
Jeroen.
Jeroen.
Classic Kabelboom Company. For all your wiring needs. http://www.classickabelboomcompany.com