need some help on id gearbox....before i do a boo-boo again
thanks nic
help id on gearbox
help id on gearbox
- Attachments
-
- IMG_2092.JPG (137.46 KiB) Viewed 656 times
-
- IMG_2091.JPG (146.63 KiB) Viewed 656 times
-
- IMG_2090.JPG (137.32 KiB) Viewed 656 times
-
- IMG_2089.JPG (145.84 KiB) Viewed 656 times
-
- IMG_2088.JPG (137.17 KiB) Viewed 656 times
-
- IMG_2087.JPG (181.06 KiB) Viewed 656 times
-
- IMG_2085.JPG (140.28 KiB) Viewed 656 times
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
-
xvivalve
- TDC West Mids Area Organiser
- Posts: 13582
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Re: help id on gearbox
Well, the overdrive was originally fitted to a Sprint...look on the bulge to the driver's side of the bellhousing and you should find a number stamped into the casting. If it is prefixed VA, then it confirms it as a Sprint 'box (the length of the input shaft would seem to confirm this...)
The numbers you've photographed elsewhere are just standard casting numbers.
The numbers you've photographed elsewhere are just standard casting numbers.
Re: help id on gearbox
thanks for pointing to the bellhousing and yes VA is marked on it
- Attachments
-
- IMG_2105.JPG (127.19 KiB) Viewed 643 times
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.
-
xvivalve
- TDC West Mids Area Organiser
- Posts: 13582
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Re: help id on gearbox
You're very welcome
Re: help id on gearbox
this sprint box is for sale in sales section
Dolomite 1300,1980`V`reg in british racing brown(russet),3.63 diff with 21t speedo pinion,95%poly`d,HL clocks,standard wheels with SE covers wrapt in 175 70 13,mot`d 19-09-2014,been off the since 1990,(july2017) stainless steel exhaust 3-piece,(xmas2018) wooden mountney steering wheel,(june2020) new monroe shock(radial front,gas-matic rears) with -1" lower`d springs all round.