Hi, does anybody know or could measure the dimensions of the speedo instrument thread eg thread, diameter and length ?
Thanks, Richard
Speedo nut size
-
RichardHyde
- Guest contributor
- Posts: 327
- Joined: Sun Dec 08, 2013 8:03 am
- Location: High Wycombe
-
new to this
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: Speedo nut size
Richard
the nut comes with the speedo cable,what bit are you after
Dave
the nut comes with the speedo cable,what bit are you after
Dave
-
xvivalve
- TDC West Mids Area Organiser
- Posts: 13582
- Joined: Thu Sep 28, 2006 1:13 pm
- Location: Over here...can't you see me?
Re: Speedo nut size
It looks to be 5/8" UNC
Actual thread length is ~ 11 mm, but there's a further ~ 1-1.5 mm shoulder on the alloy spigot, there's then a further brass shoulder protruding from the alloy which is ~8 mm long and ~10 mm ø
Actual thread length is ~ 11 mm, but there's a further ~ 1-1.5 mm shoulder on the alloy spigot, there's then a further brass shoulder protruding from the alloy which is ~8 mm long and ~10 mm ø