Hi
What would you recommend to re-colour the lower part of a black door card?
not the vinyl, the furry bit...
Mine are getting a bit faded.
door cards
- whydidistartthis
- TDC Member
- Posts: 474
- Joined: Sun Jan 03, 2010 8:39 am
- Location: Maidstone, kent
-
- TDC Member
- Posts: 1793
- Joined: Mon Dec 12, 2016 9:53 pm
- Location: Harrow Middlesex
Re: door cards
Hi ive dye my carpet black , you could try dye the door cards
Dave
Dave
-
- TDC Cheshire Area Organiser
- Posts: 1410
- Joined: Wed May 17, 2017 6:28 pm
- Location: NANTWICH.
Re: door cards
I got some dye from Hobby world to do my Stag ones, and they out great
I was going to replace them but thought try dye before i buy, so to speak.
Tony.

Tony.
NOW A CLUB MEMBER 2017057 

- GrahamFountain
- Guest contributor
- Posts: 1735
- Joined: Sun Sep 08, 2013 3:35 pm
- Location: St Annes on Sea, Lancs.
Re: door cards
On a related note: Has anybody managed to repair the holes in the hardboard where the clips should sit, but pull out when the board's been wet. Alternatively, got an alternative to the clips? The one someone used on the Herald that I won't do to the Doly is put black flange-head self tappers all round the edge, which I've swapped out for black stainless ones. It works, but it's not pretty.
Graham
Graham
The 16v Slant 4 engine is more fun than the 3.5 V8, because you mostly drive it on the upslope of the torque curve.
Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).
Factory 1977 TR7 Sprint FHC VVC 697S (Now all of, but still needs putting together)
B&Y 73 Dolomite Sprint UVB 274M (kids!)
1970 Maroon 13/60 Herald Convertable (wife's fun car).